Dean Goodin's Real Street 275 turbo kit: By Tick Performance
#103
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Customer started to cut some weight out of the car over the last few days.
Says he has removed around 20lbs. so far and has his sights set on removing another 10-20 where he can before spending any money on making it lighter.
He's been asking about Optic Armor lexan for the front and rear. That should drop an easy 60-70lbs off the car. Combine that with the 20-30, maybe 40 lbs. he thinks he can take out and that'll be 100lbs. gone!
5.teens are next!
Says he has removed around 20lbs. so far and has his sights set on removing another 10-20 where he can before spending any money on making it lighter.
He's been asking about Optic Armor lexan for the front and rear. That should drop an easy 60-70lbs off the car. Combine that with the 20-30, maybe 40 lbs. he thinks he can take out and that'll be 100lbs. gone!
5.teens are next!
#104
TECH Fanatic
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Customer started to cut some weight out of the car over the last few days.
Says he has removed around 20lbs. so far and has his sights set on removing another 10-20 where he can before spending any money on making it lighter.
He's been asking about Optic Armor lexan for the front and rear. That should drop an easy 60-70lbs off the car. Combine that with the 20-30, maybe 40 lbs. he thinks he can take out and that'll be 100lbs. gone!
5.teens are next!
Says he has removed around 20lbs. so far and has his sights set on removing another 10-20 where he can before spending any money on making it lighter.
He's been asking about Optic Armor lexan for the front and rear. That should drop an easy 60-70lbs off the car. Combine that with the 20-30, maybe 40 lbs. he thinks he can take out and that'll be 100lbs. gone!
5.teens are next!
#106
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
No it won't do it from the weight alone.
Getting the boost in faster on a good track that can hold it and raising the launch RPM and launch boost combined with the weight loss will do it though.
There are some on Facebook, but I'm not sure if any have been posted to Youtube.
It now has a PTC 9.5" converter in it spec'd by Dusty Bradford that locks up super hard and is extremely efficient. It drops 1000-1100 on the shift and we're shifting it at 7200-7400rpm. Flashes to 6200-6400rpm currently. It couples so hard that it pulls the engine down from 6400 to 6250-6300 on launch.
Once we get some more power to it early and raise the launch RPM and launch boost we're hoping that RPM "sag" will go away and let the car get on its heels sooner in the run.
Getting the boost in faster on a good track that can hold it and raising the launch RPM and launch boost combined with the weight loss will do it though.
It now has a PTC 9.5" converter in it spec'd by Dusty Bradford that locks up super hard and is extremely efficient. It drops 1000-1100 on the shift and we're shifting it at 7200-7400rpm. Flashes to 6200-6400rpm currently. It couples so hard that it pulls the engine down from 6400 to 6250-6300 on launch.
Once we get some more power to it early and raise the launch RPM and launch boost we're hoping that RPM "sag" will go away and let the car get on its heels sooner in the run.
#109
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
There are some on Facebook. The problem is with these high quality videos that most take with their cell phones is that they cannot be sent via text message and only uploaded to Facebook or Youtube.
Most people seem to upload them straight to Facebook. I do not have any videos of this car on my phone, but I believe there is one on Facebook of a 5.45@133 pass.
Most people seem to upload them straight to Facebook. I do not have any videos of this car on my phone, but I believe there is one on Facebook of a 5.45@133 pass.
#111
TECH Fanatic
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This may or not be visible to the public, but try it anyways.
https://www.facebook.com/video.php?v...type=3&theater
https://www.facebook.com/video.php?v...type=3&theater
#114
TECH Fanatic
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I know Dean was fresh to the turbo world and the car had a few things that had to be worked out but its came a long way from that day at Mooresville. You know all about those growing pains already Martin lol.