Forced Induction Superchargers | Turbochargers | Intercoolers

Stock bottom end lq9 930whp 17psi 91mm garrett

Thread Tools
 
Search this Thread
 
Old 01-07-2014 | 11:36 PM
  #61  
Hi Volume's Avatar
TECH Regular

iTrader: (3)
 
Joined: Nov 2005
Posts: 430
Likes: 0
From: NoCal
Default

saweet numbers! I literally just picked up a FREE 03 LQ9 longblock today! After seeing this thread, im really stoked!
Old 01-08-2014 | 12:20 AM
  #62  
LS-Rx7's Avatar
Thread Starter
Teching In
 
Joined: Apr 2010
Posts: 26
Likes: 1
Default

I took the car to the track back in August ran a 9.8@151 blowing the tires off to the 1/8. The track kicked me out said not to come back unless I get a cage. I Went to another track in November and took out the thrust bearing on the crank so the motor is getting forged up.
Old 01-08-2014 | 02:02 AM
  #63  
Hi Volume's Avatar
TECH Regular

iTrader: (3)
 
Joined: Nov 2005
Posts: 430
Likes: 0
From: NoCal
Default

Originally Posted by LS-Rx7
I took the car to the track back in August ran a 9.8@151 blowing the tires off to the 1/8. The track kicked me out said not to come back unless I get a cage. I Went to another track in November and took out the thrust bearing on the crank so the motor is getting forged up.
what kinda tire and size? That mph is good for low low 9s for sure!
Old 01-08-2014 | 02:29 AM
  #64  
LS-Rx7's Avatar
Thread Starter
Teching In
 
Joined: Apr 2010
Posts: 26
Likes: 1
Default

26x9 Hoosier
Old 01-08-2014 | 12:47 PM
  #65  
Hi Volume's Avatar
TECH Regular

iTrader: (3)
 
Joined: Nov 2005
Posts: 430
Likes: 0
From: NoCal
Default

Originally Posted by LS-Rx7
26x9 Hoosier
ah, gotta get a 28" in there!!! I purposely clearanced my rear 1/4 flares so i could fit a 28x10, possibly a 29" even
Old 01-08-2014 | 10:51 PM
  #66  
LS-Rx7's Avatar
Thread Starter
Teching In
 
Joined: Apr 2010
Posts: 26
Likes: 1
Default

I have a FC there is less room. There was no prep at the track when I ran the 9.8
Old 01-09-2014 | 07:38 AM
  #67  
ATSMATT's Avatar
On The Tree
iTrader: (6)
 
Joined: May 2007
Posts: 112
Likes: 0
Default

Lets see some pics of the setup
Old 01-09-2014 | 07:49 AM
  #68  
kainedogg's Avatar
TECH Fanatic
iTrader: (23)
 
Joined: Mar 2006
Posts: 1,313
Likes: 5
Default

What he said. I wonder if it would have lived longer at 600whp
Old 01-09-2014 | 08:32 AM
  #69  
rotary1307cc's Avatar
8 Second Club
iTrader: (5)
 
Joined: Jan 2007
Posts: 2,790
Likes: 123
Default

The car is just fine on 26s.

The motor was just fine too. It was a transmission issue that knocked out the thrust
Old 01-11-2014 | 02:39 AM
  #70  
LS-Rx7's Avatar
Thread Starter
Teching In
 
Joined: Apr 2010
Posts: 26
Likes: 1
Default

Here is the setup
Attached Thumbnails Stock bottom end lq9 930whp 17psi 91mm garrett-791550c7-880a-4049-a8d7-968c31b64998_zpspwo4o4qh.jpg  
Old 01-11-2014 | 08:40 AM
  #71  
kainedogg's Avatar
TECH Fanatic
iTrader: (23)
 
Joined: Mar 2006
Posts: 1,313
Likes: 5
Default

How did the trans affect the thrust bearing?
Old 01-11-2014 | 03:58 PM
  #72  
LS-Rx7's Avatar
Thread Starter
Teching In
 
Joined: Apr 2010
Posts: 26
Likes: 1
Default

When I was on the trans brake it was building too much thrust pressure in the converter causing the crank to be pushed forward.

The place that built my trans didn't restrict the converter feed in the pump as u can see in the pics.
Attached Thumbnails Stock bottom end lq9 930whp 17psi 91mm garrett-ecea9029-6945-4ef8-91f6-f06f14269c93_zpsxy6u7yp7.jpg   Stock bottom end lq9 930whp 17psi 91mm garrett-51fd3832-3eef-428b-ba3e-774d7df268b0_zpsptdqzjqy.jpg  
Old 01-11-2014 | 06:11 PM
  #73  
Burken01's Avatar
TECH Addict
15 Year Member
iTrader: (88)
 
Joined: Mar 2005
Posts: 2,923
Likes: 13
From: Anaheim, Ca
Default

Originally Posted by LS-Rx7
When I was on the trans brake it was building too much thrust pressure in the converter causing the crank to be pushed forward.

The place that built my trans didn't restrict the converter feed in the pump as u can see in the pics.
Who built the trans
Old 01-11-2014 | 07:16 PM
  #74  
LS-Rx7's Avatar
Thread Starter
Teching In
 
Joined: Apr 2010
Posts: 26
Likes: 1
Default

Mad dog transmissions



Quick Reply: Stock bottom end lq9 930whp 17psi 91mm garrett



All times are GMT -5. The time now is 02:53 PM.