WS6HUMMER'S Second build, GT4788 LS1
#1
WS6HUMMER'S Second build, GT4788 LS1
Well I outgrew my first kit and am building a second, I started march of last year but personal reasons made me loose interest for a while but I'm back at it again. Anyway here's what I got so far, I'm really trying to make this build a little cleaner than the last.
Its a Garrett GT4788 turbo, nothing fancy, I'm running a precision 66mm wastegate and haven't bought a BOV yet. This kit is a regular truck manifold setup just v-banded, running a 4" 11ga aluminum DP.
Turbo
Had them powder coated
Its a Garrett GT4788 turbo, nothing fancy, I'm running a precision 66mm wastegate and haven't bought a BOV yet. This kit is a regular truck manifold setup just v-banded, running a 4" 11ga aluminum DP.
Turbo
Had them powder coated
#7
Thanks man, yep still rockin the stock LS1, I have a 50k lq9 and a 1.23 housing for the turbo if I can ever afford to build a motor, that wont be anytime real soon though.
Thanks!
Me too, it feels so good to be progressing with the build, thanks!
Trending Topics
#8
TECH Enthusiast
iTrader: (2)
Well I outgrew my first kit and am building a second, I started march of last year but personal reasons made me loose interest for a while but I'm back at it again. Anyway here's what I got so far, I'm really trying to make this build a little cleaner than the last.
Its a Garrett GT4788 turbo, nothing fancy, I'm running a precision 66mm wastegate and haven't bought a BOV yet. This kit is a regular truck manifold setup just v-banded, running a 4" 11ga aluminum DP.
Turbo
Had them powder coated
Its a Garrett GT4788 turbo, nothing fancy, I'm running a precision 66mm wastegate and haven't bought a BOV yet. This kit is a regular truck manifold setup just v-banded, running a 4" 11ga aluminum DP.
Turbo
Had them powder coated
#11
What track you going to these days?
#12
Well I have been out of racing for the last couple years but we go to State Capitol and NPR mostly. Some trips to NPR and Evadale TX. My brother Earl is driving around in his 7second Mustang getting ready for Dragweek!
#15
He had some problems last couple times to SCR trying to get that lencodrive/converter setup working right. He's been 7.50@180+mph but he's always changing stuff around to get the car where it should be with. 606ci and twin 88's!
#19
To hold the radiator in place I welded 4 little pieces of 16ga steel to keep it from moving, if you look at the pic of the turbo brace mounted to the fraim rails I posted you can see them on the bottom of the radiator support, just have to know what your looking for to see them.