370-TFS GenX 255's-Hi Ram-S400-th400-9"
#21
12 Second Club
iTrader: (2)
Joined: Jan 2011
Posts: 1,215
Likes: 1
From: Old Bridge, NJ/Corpus Christi, TX
Sub'd. Do you plan on building any supports for the turbo? I was going to run this turbo on the Huron kit but Jon advised me against it because the kit was not designed for the weight of the turbo...
#23
Got the cowl trimmed up pretty good, hopefully the windshield will go untouched and it will fit right in!
Waiting on a few other parts that should be here by next week to tie up the drivetrain then it will just be a waiting game for my heads and turbo!
On a side note, i am thinking about beadlocking my Weld RTS... what do you guys think? Champion does them for 200 each, then i would paint my front all black
Waiting on a few other parts that should be here by next week to tie up the drivetrain then it will just be a waiting game for my heads and turbo!
On a side note, i am thinking about beadlocking my Weld RTS... what do you guys think? Champion does them for 200 each, then i would paint my front all black
#26
I'm curious as to what this car is gonna weight! This is a stripper camaro but I also added 9",iron block and a big *** turbo! Once it's all said and done with 8 point cage, vfn hood, light carpet, kirkey seats I would like to be able to get down to 3100 without me in it.
#28
#29
#33
That's pretty bad ***!! I have the same exact parts you do except I am running a single plane intake. Down to the suspension parts, converter and I have polished RTS wheels. I have a little more cubic inches. This Huron kit looks nice. I also opted to just put on a t6 flange on the kit and run it as is. Definitely in for results. .... I'm still waiting on my new motor to be finished and have to order a cam.
#35
Yea i was going to sell mine and get champions but i think my existing wheels plus the champion beadlocks look sweet!! ill probly do the beadlocks on the next stage of the build along with the 8 point cage and chute because right now im just trying to scrounge up money from under my couches to finish this dam build!
#37
Yea i was going to sell mine and get champions but i think my existing wheels plus the champion beadlocks look sweet!! ill probly do the beadlocks on the next stage of the build along with the 8 point cage and chute because right now im just trying to scrounge up money from under my couches to finish this dam build!
#39
Ended up coming to the conclusion that i would have more money in my T4 kit than i would if i were to sell it and buy a T6 Hotside...
With that being said i gave someone a really good deal on the complete T4 kit and contacted huron speed to build me a custom T6 hotside that mounts the turbo compressor directly underneath the TB since i will be going non intercooled.
T6 kit will consist of either dual 4" downpipes coming out the fenders or a single 5" out the fender but as of right now that is undetermine. I will probably end up going with either the JGS 60mm or Precision 66mm wastegate.
Also going to be switching to a powerglide and will be ordering Rosslers terminator 3 with billet 1.80 Straight cut gears etc! going to start off with 4.10's out back and see how that goes!
since the car is going to be down longer than i expected i went ahead and ordered a Wolfe 8 point weld in cage and will have a local shop weld it in for me!
With that being said i gave someone a really good deal on the complete T4 kit and contacted huron speed to build me a custom T6 hotside that mounts the turbo compressor directly underneath the TB since i will be going non intercooled.
T6 kit will consist of either dual 4" downpipes coming out the fenders or a single 5" out the fender but as of right now that is undetermine. I will probably end up going with either the JGS 60mm or Precision 66mm wastegate.
Also going to be switching to a powerglide and will be ordering Rosslers terminator 3 with billet 1.80 Straight cut gears etc! going to start off with 4.10's out back and see how that goes!
since the car is going to be down longer than i expected i went ahead and ordered a Wolfe 8 point weld in cage and will have a local shop weld it in for me!