97 Camaro LS1(346) 76MM Turbo Build Thread
#201
Thanks for the compliments guys! This has been a big project but a fun one, for me at least!
Last couple pics from the other night.
We got the bump box back from Leash. I trimmed the wires and put the molex plug back on. Plugged it up and tested while we were waiting on Ted to get to the shop. It worked! I don't know what was going on originally, or if anything was and Leash just fixed the box or sent us a new one. Oh well I'll take it! This, along with cranking the car, was the last things that needed to be tested electrical wise on the car.
I took the corrugated loom off the bump box wires and put some leftover power braid since it looks so cool
Thadd made some labels for the relays that I'm gonna stick on. I think we are gonna stick the interior back in Saturday!
Last couple pics from the other night.
We got the bump box back from Leash. I trimmed the wires and put the molex plug back on. Plugged it up and tested while we were waiting on Ted to get to the shop. It worked! I don't know what was going on originally, or if anything was and Leash just fixed the box or sent us a new one. Oh well I'll take it! This, along with cranking the car, was the last things that needed to be tested electrical wise on the car.
I took the corrugated loom off the bump box wires and put some leftover power braid since it looks so cool
Thadd made some labels for the relays that I'm gonna stick on. I think we are gonna stick the interior back in Saturday!
#206
Here are my pics from today
Thadd made some labels at his work and I stuck them on the relays while we were waiting on the glass guys to get there. No more blue painters tape!
Got the dash back in. Nuff Nuf stopped by to give us a hand.
Props to Medlin Auto glass. Fast and efficient, plus they are old school racers and fun to shoot the **** with.
Big ol bead
Thadd made some labels at his work and I stuck them on the relays while we were waiting on the glass guys to get there. No more blue painters tape!
Got the dash back in. Nuff Nuf stopped by to give us a hand.
Props to Medlin Auto glass. Fast and efficient, plus they are old school racers and fun to shoot the **** with.
Big ol bead
#207
Stuck the glove box back in
This is under the steering column. You can see the harness for the tach and molex plug
Tied up the rest of the tach harness out of harms way
This is the transbrake button wires. It will be here along with the bump box button wires, which should be in Tuesday. They will each get a molex plug and be zip tied here. The plastic panel under the steering column will conceal everything.
Gauges installed and lit up
Center console in
Good laid back day today. Looks like a car again!!
This is under the steering column. You can see the harness for the tach and molex plug
Tied up the rest of the tach harness out of harms way
This is the transbrake button wires. It will be here along with the bump box button wires, which should be in Tuesday. They will each get a molex plug and be zip tied here. The plastic panel under the steering column will conceal everything.
Gauges installed and lit up
Center console in
Good laid back day today. Looks like a car again!!
#212
8 Second Club
Thread Starter
iTrader: (12)
Join Date: Nov 2010
Location: Durham
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
Finally got the throttle cable installed
Installed a catch can at the rear of the car for the trans incase it ever decides to puke fluid
If I can get my hands on some C16 today we will put it on a friends dyno to clean up the tune and to check everything out. After that it goes to Ryan at RPM for WOT hits
Installed a catch can at the rear of the car for the trans incase it ever decides to puke fluid
If I can get my hands on some C16 today we will put it on a friends dyno to clean up the tune and to check everything out. After that it goes to Ryan at RPM for WOT hits