Help picking new turbo going from 960-1200rwhp
#1
10 Second Club
Thread Starter
iTrader: (27)
Join Date: Sep 2008
Location: Lake Tapps, WA
Posts: 2,229
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I presently have what I think is called a S483 (83 billet comp/ 92mm comp) T4 housing. Here's my problem this turbo is as physically large as I can fit. Also needs to stay a T4. Any suggestions?[IMG]
[/IMG]
6.0L
390CI
ETP 245 heads
4L80#
![](http://i247.photobucket.com/albums/gg131/keith42_01/rbohotside012.jpg)
6.0L
390CI
ETP 245 heads
4L80#
Trending Topics
#9
TECH Addict
iTrader: (28)
Join Date: Sep 2008
Location: Deer park
Posts: 2,258
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I dont think you will see that much of a gain going to the 84m... they were already having BP issues wuth the billet 80 and 96mm turbine. My oower goals are the same as yours and I am looking at the GT5088
#17
10 Second Club
Thread Starter
iTrader: (27)
Join Date: Sep 2008
Location: Lake Tapps, WA
Posts: 2,229
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have no proof of the back pressure hurting motors but I've seen 2 motors lift and torch the heads when the small turbines where pushed hard. Not saying that was the cause but it looked possible.
#18
TECH Senior Member
iTrader: (17)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
No haven't measured and absolutely no room for anything larger than the 4" I'm already running.
I have no proof of the back pressure hurting motors but I've seen 2 motors lift and torch the heads when the small turbines where pushed hard. Not saying that was the cause but it looked possible.
I have no proof of the back pressure hurting motors but I've seen 2 motors lift and torch the heads when the small turbines where pushed hard. Not saying that was the cause but it looked possible.
#19
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I think we can get you DANG close. We are building a max effort T4 76mm now for a certain customer on this board now. Should see what it does very soon. I'm thinking 7's will be possible with our T4....if not RIGHT at it.