Post pics of your v banded manifolds! And cross over pipes!
#46
8 Second Club
iTrader: (19)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Post pics of your v banded manifolds! And cross over pipes!-image-1546938572.jpg](https://ls1tech.com/forums/attachments/forced-induction/436518d1469573708t-post-pics-your-v-banded-manifolds-cross-over-pipes-image-1546938572.jpg)
![Post pics of your v banded manifolds! And cross over pipes!-image-2298569361.jpg](https://ls1tech.com/forums/attachments/forced-induction/436519d1469573708t-post-pics-your-v-banded-manifolds-cross-over-pipes-image-2298569361.jpg)
![Post pics of your v banded manifolds! And cross over pipes!-image-2608146065.jpg](https://ls1tech.com/forums/attachments/forced-induction/436520d1469573708t-post-pics-your-v-banded-manifolds-cross-over-pipes-image-2608146065.jpg)
I had 3" lying around so I used it. I'm building a twin setup so I wasn't concerned with velocity as the distance the gasses have to travel is very short. I used 308 SS mig wire and did my best to keep the cracks to a minimum.
I pre heated the manifolds to 400 degrees and went to work. When I was done welding I threw them back in the oven for a few hours and slowly reduced the heat. I won't be able to see if they hold for another few months but hey.. They look good.
#48
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I agree. Camaro9969 does AWSOME work. Any build threads or shop links?
thanks,
Jim
thanks,
Jim