A2W Setups Lets see some pics!
#61
378CID Ported 317's by the car owner. Turbonetics cast wheel 61/65 .68 A/R 16.7 psi boost 1026RWHP 145MPH trap speed on 13PSI . This thread has the build info. https://ls1tech.com/forums/forced-in...eo-inside.html
#62
Chris told me that the car wasted the drag radials 1-2-3rd on 13psi "M6 car"
and trapped 108mph in the 1/8 and 145mph out the back door and only ran 11.6.
He said the car was undrivable on 16 psi with the DR's.
He will see this and step in with more details.
I don't know what it weights but it has stock wheel cage the added weight of the turbo
system and a 12 bolt.
and trapped 108mph in the 1/8 and 145mph out the back door and only ran 11.6.
He said the car was undrivable on 16 psi with the DR's.
He will see this and step in with more details.
I don't know what it weights but it has stock wheel cage the added weight of the turbo
system and a 12 bolt.
#64
#66
#67
If you wanna check out the entire build thread:
http://www.performancetrucks.net/for...h-more-463288/
I'm gonna warn you though. It is looooong.
http://www.performancetrucks.net/for...h-more-463288/
I'm gonna warn you though. It is looooong.
race part solutions
Gonna check it out, right now.
Thanks dude!
#69
#70
We appreciate the love, and do our best to give back to the community...specifically this one, and yellowbullet. By far, the most hardcore and well rounded.
Make sure if you do call us, you let us know where you're from. However, lots of our forum vendors here do carry our products, support them the best you can, we'll fill in any gaps.
Haha..AWESOME...and well... that's a good question. I'll PM you the response.
Make sure if you do call us, you let us know where you're from. However, lots of our forum vendors here do carry our products, support them the best you can, we'll fill in any gaps.
Haha..AWESOME...and well... that's a good question. I'll PM you the response.
#72
And with NO ice the iat's never get more than 10 degrees higher than ambient. I've actually never seen more than 8° above ambient because the heat exchanger draws the heat back out of the water.
#73
Good to know we have someone on here from RPS. I have A LOT of parts from you guys on my car. As a matter of fact the piping in the pics I posted above came from you guys
Last edited by THADD; 08-19-2014 at 07:31 PM.
#75
Forgive my ignorance, but are A2W intercoolers usually only used for track/race type cars? Are they that much better than a a2a on the street or only a big difference when racing? Just thinking if its that much better on the street as well, I might want to look into that twin setup with the top exit a2w intercooler that Tick Performance posted. Opinions Thadd and everyone??
#76
Forgive my ignorance, but are A2W intercoolers usually only used for track/race type cars? Are they that much better than a a2a on the street or only a big difference when racing? Just thinking if its that much better on the street as well, I might want to look into that twin setup with the top exit a2w intercooler that Tick Performance posted. Opinions Thadd and everyone??
#77
Nice.
yea buddy. Glad to be here. Actually, all but one of us at RPS are boosted LSx owners. All are on the site as well(yellowbullet too).. just low key. We really do appreciate everyone using our products...we do our utmost to do what we can. Thank you, very much.
If you or anyone have tech questions about our stuff...or planned products, let me know anytime. If I can't answer the question myself(I am the least smartest dude here, I say humbly) I will ask the honcho's.
Jamie
yea buddy. Glad to be here. Actually, all but one of us at RPS are boosted LSx owners. All are on the site as well(yellowbullet too).. just low key. We really do appreciate everyone using our products...we do our utmost to do what we can. Thank you, very much.
If you or anyone have tech questions about our stuff...or planned products, let me know anytime. If I can't answer the question myself(I am the least smartest dude here, I say humbly) I will ask the honcho's.
Jamie
#78
Nice. yea buddy. Glad to be here. Actually, all but one of us at RPS are boosted LSx owners. All are on the site as well(yellowbullet too).. just low key. We really do appreciate everyone using our products...we do our utmost to do what we can. Thank you, very much. If you or anyone have tech questions about our stuff...or planned products, let me know anytime. If I can't answer the question myself(I am the least smartest dude here, I say humbly) I will ask the honcho's. Jamie
#80
Hoping next year but it would be great to meet people we work with. Always down for a handshake! Send us some pics of your ride, we'll put those up on our page if cool with you. BEST WISHES at the events!!! If we end up going to any, we'll post up.