Forced Induction Superchargers | Turbochargers | Intercoolers

Turbo 5.3 dyno results

Thread Tools
 
Search this Thread
 
Old 09-27-2014 | 08:56 AM
  #21  
95bowtie's Avatar
TECH Enthusiast
 
Joined: Mar 2010
Posts: 519
Likes: 2
Default

Originally Posted by dean85gt
Ran a 10.4 at 139 with a 1.76 60'. Leaving off idle without boost. I cant get this car out of the hole too good. This was on 17' et street drag radials
Oh yeah that's a 9 sec pass if you got the 60' down.
Old 09-27-2014 | 09:59 AM
  #22  
chiaj144's Avatar
Banned
iTrader: (4)
 
Joined: Dec 2009
Posts: 483
Likes: 1
From: Usa
Default

Nice mph. Did you log that pass? How long to get into boost? Did the car stay hooked once the boost came in? I did a 10.4@135 with a 1.64 60' but took over 4 seconds to get to WOT. Had to shift to second before it would hook. How do you like the Holley and did you tune it yourself? I've changed my tune quit a bit from the one I sent you.
Old 09-27-2014 | 02:19 PM
  #23  
dean85gt's Avatar
Thread Starter
On The Tree
iTrader: (7)
 
Joined: Jan 2010
Posts: 149
Likes: 0
Default

Originally Posted by chiaj144
Nice mph. Did you log that pass? How long to get into boost? Did the car stay hooked once the boost came in? I did a 10.4@135 with a 1.64 60' but took over 4 seconds to get to WOT. Had to shift to second before it would hook. How do you like the Holley and did you tune it yourself? I've changed my tune quit a bit from the one I sent you.
Ya i tuned it myself. Only running 10.5 degrees of timing and AFR of 10.8. I didnt log that run because i forgot. Boost comes on relatively quickly. I initially had a bog off idle but that cleaned itself up
Old 10-05-2014 | 12:57 PM
  #24  
dean85gt's Avatar
Thread Starter
On The Tree
iTrader: (7)
 
Joined: Jan 2010
Posts: 149
Likes: 0
Default

10.26 @ 141 now. 1.76 60' lol. Dumping these 17" drag radials and stepping down to 15"
Old 10-05-2014 | 01:28 PM
  #25  
yenkomike's Avatar
9 Second Club
iTrader: (2)
 
Joined: Aug 2013
Posts: 1,415
Likes: 181
From: oxford mi
Default

nice run. should go high nines easy with 15" slicks. ...sweet
Old 10-05-2014 | 04:54 PM
  #26  
dean85gt's Avatar
Thread Starter
On The Tree
iTrader: (7)
 
Joined: Jan 2010
Posts: 149
Likes: 0
Default

Heres a vid. I actually redlighted here because i tried to hold to stall the car too high and it pushed forward. That cobra runs 9.57 @141

Yes i have 18" rims on the front lol




Quick Reply: Turbo 5.3 dyno results



All times are GMT -5. The time now is 01:30 AM.