How to option my Holley Dominator???
#1
How to option my Holley Dominator???
Car is a street strip car. Alot of strip. 427 Dart LS Next, TH400 RMVB and TB, full suspension and MWC rear. I am looking to see all what I need to run the Dominator setup. I plan on running their 160 low impedance injectors, meth, boost controller, two step, transbrake, wideband but what else do i need?????
#2
9 Second Club
iTrader: (9)
it all depends on how much you want to dress it up. You will need 3 0-100 psi sensors, one for fuel pressure, another for WG and the third to log back pressure if you like. oh and make sure you get the NTK wide band and not the Bosch.
Last edited by ls1CANTU; 10-12-2014 at 11:03 AM.
#3
TECH Enthusiast
iTrader: (2)
Car is a street strip car. Alot of strip. 427 Dart LS Next, TH400 RMVB and TB, full suspension and MWC rear. I am looking to see all what I need to run the Dominator setup. I plan on running their 160 low impedance injectors, meth, boost controller, two step, transbrake, wideband but what else do i need?????
#4
TECH Enthusiast
iTrader: (4)
I went with the Bosch, is there that big of a difference? My setup has only ran a few times before going under the knife again.
By the time I got done with my Holley setup, I stopped counting the dollars. It's not cheap, but seems to be worth it. Would be nice if the transducers were cheaper, those little things seem to nickle and dime you.
The LCD screen is awesome and don't think I would want the system without it, or some kind of tablet. The tablet is something to think about, Yellowbullet covers it in detail.
I the information seems scarce for the moment on the traction control, but that also greatly influenced my purchase.
By the time I got done with my Holley setup, I stopped counting the dollars. It's not cheap, but seems to be worth it. Would be nice if the transducers were cheaper, those little things seem to nickle and dime you.
The LCD screen is awesome and don't think I would want the system without it, or some kind of tablet. The tablet is something to think about, Yellowbullet covers it in detail.
I the information seems scarce for the moment on the traction control, but that also greatly influenced my purchase.
#5
I went with the Bosch, is there that big of a difference? My setup has only ran a few times before going under the knife again.
By the time I got done with my Holley setup, I stopped counting the dollars. It's not cheap, but seems to be worth it. Would be nice if the transducers were cheaper, those little things seem to nickle and dime you.
The LCD screen is awesome and don't think I would want the system without it, or some kind of tablet. The tablet is something to think about, Yellowbullet covers it in detail.
I the information seems scarce for the moment on the traction control, but that also greatly influenced my purchase.
By the time I got done with my Holley setup, I stopped counting the dollars. It's not cheap, but seems to be worth it. Would be nice if the transducers were cheaper, those little things seem to nickle and dime you.
The LCD screen is awesome and don't think I would want the system without it, or some kind of tablet. The tablet is something to think about, Yellowbullet covers it in detail.
I the information seems scarce for the moment on the traction control, but that also greatly influenced my purchase.
Thanks ls1cantu too
#6
8 Second Club
iTrader: (19)
http://www.yellowbullet.com/forum/sh...d.php?t=559816
If the tablet thread is what you where After. There are many more options out there that this thread doesn't cover though. You need A tablet that runs only on windows 7 or 8 not RT, android, Apple etc. I bought a toshiba tablet for $200 at best buy and it works great.
If the tablet thread is what you where After. There are many more options out there that this thread doesn't cover though. You need A tablet that runs only on windows 7 or 8 not RT, android, Apple etc. I bought a toshiba tablet for $200 at best buy and it works great.
Trending Topics
#8
TECH Addict
iTrader: (48)
Is anybody going fast with a HP instead of the Dominator? Although i want to go fast, (low 5's) i dont plan on this being a full blown race car/program. If i can get that done with a HP, i will. I just see the Dominator being talked about. I dont need transmission control. Just a turbo street/strip car with 1K+rwhp.
#9
8 Second Club
iTrader: (19)
Is anybody going fast with a HP instead of the Dominator? Although i want to go fast, (low 5's) i dont plan on this being a full blown race car/program. If i can get that done with a HP, i will. I just see the Dominator being talked about. I dont need transmission control. Just a turbo street/strip car with 1K+rwhp.
Last edited by oscs; 10-13-2014 at 02:20 PM.
#10
11 Second Club
iTrader: (1)
I know Jarrett (Stock48) runs the HP on his car. Make sure it has enough inputs/outputs for your needs. The HP is also limited to 1 WB O2. The dominator also does Drive by Wire. Here's the Holley doc outlining the differences:
https://ac17cb7e3cc3506f0d23-7386afb...useanddiff.pdf
Mike
https://ac17cb7e3cc3506f0d23-7386afb...useanddiff.pdf
Mike
Last edited by M_Minnick; 10-13-2014 at 02:10 PM.
#11
11 Second Club
iTrader: (43)
http://www.yellowbullet.com/forum/sh...d.php?t=559816
If the tablet thread is what you where After. There are many more options out there that this thread doesn't cover though. You need A tablet that runs only on windows 7 or 8 not RT, android, Apple etc. I bought a toshiba tablet for $200 at best buy and it works great.
If the tablet thread is what you where After. There are many more options out there that this thread doesn't cover though. You need A tablet that runs only on windows 7 or 8 not RT, android, Apple etc. I bought a toshiba tablet for $200 at best buy and it works great.
#20
8 Second Club
iTrader: (19)
Last edited by oscs; 10-13-2014 at 08:38 PM.