Can this be done on pump gas?

Reply Subscribe

Thread Tools

Search this Thread

Oct 18, 2014 | 01:06 PM

SpeedJunkee

Thread Starter

TECH Regular

Joined: Oct 2014

Posts: 415

Likes: 2

Can this be done on pump gas?

My motor is fully forged, 8.8:1 CR (LT1). I have a FMIC, and plan on running meth injection.

I am going to go with an 88mm turbo. I want to stay with pump gas because there is no E85 in my area, and it will not be a track car.

I want to make 800-1,000 at the tires. Can this be done safely on pump gas?

As a side question, what size and brand injectors would you recommend?

Oct 18, 2014 | 01:37 PM

krazy4

12 Second Club

iTrader: (5)

Joined: Mar 2006

Posts: 1,457

Likes: 3

From: Yorba Linda, CA

Are you opposed to methanol injection?

That would make it a lot easier and safer.

Oct 18, 2014 | 02:29 PM

stevieturbo

9 Second Club

Joined: Nov 2003

Posts: 13,616

Likes: 185

From: Norn Iron

Quote:

Originally Posted by SpeedJunkee

At that compression, as long as you've a good intercooler I dont see a problem making the power if the setup supports the numbers. Unless the gas available to you is totally horrific

Oct 18, 2014 | 07:12 PM

SpeedJunkee

Thread Starter

TECH Regular

Joined: Oct 2014

Posts: 415

Likes: 2

Quote:

Originally Posted by krazy4

Are you opposed to methanol injection?

That would make it a lot easier and safer.

Read my post. I said I was planning on running meth and a FMIC.

Oct 18, 2014 | 07:14 PM

SpeedJunkee

Thread Starter

TECH Regular

Joined: Oct 2014

Posts: 415

Likes: 2

Quote:

Originally Posted by stevieturbo

At that compression, as long as you've a good intercooler I dont see a problem making the power if the setup supports the numbers. Unless the gas available to you is totally horrific

The octane here at premium is 93, so should be good (better than 91 or lower like other places).

Thanks for the input!