71 camaro 5.3 swap build thread
#22
Teching In
Thread Starter
Join Date: Oct 2014
Location: Kannapolis N.C
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Here goes, finally got the car on the rollers and things didn't go so well. it was struggling to make power, it made 561 before it started having a lot of blow by, at first we were thinking the rings were not seated. after tearing it down for a closer look found #1-#3 and #7 pistons were broke on the second ring gland. So we got a new set of wiseco 3.800 pistons on the way and a set of callys H-beams, going to go with a little John cam shaft with tooly springs. Hopefully things will go a little better this go round. Stay tuned
#27
Teching In
Thread Starter
Join Date: Oct 2014
Location: Kannapolis N.C
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Once I get started putting everything back together I'll post some more detailed pic's. I have several that I have taken from the first go around just haven't posted. For the guys that have any questions pm me and I'll be glad to post up some pics. Sorry I don't document every little aspect of my build, I'm more concerned about getting things worked out and then I'll update.