Mightymike2000ss

iTrader: (4)

Hey guys,

I am just curious I am looking into swapping my single set up for twins, and I'm looking at a new intercooler. I am wondering what everyone on here is using? I've seen a few on ebay for decent price. I had a CXracing one on my GT47-88, and it made didn't have any issues. Can anyone give me advice on what they are using.

Mightymike2000ss

iTrader: (4)

I found a GodSpeed one on ebay, said it was rated at 850-900. It's gotta be almost as good as the cxracing one I had for my Garrett

Inspector12

iTrader: (29)

I used a Treadstone one and I made 1200rwhp with it with good IAT's. I upgraded to a a bigger Bell intercooler because I am going to push it a little farther. But so far the IAT's are similar to the Treadstone LOL! I have it for sale BTW. GL!

lsx1

This is the treadstone intercooler that I used on my twins setup

Mightymike2000ss

iTrader: (4)

I was just curious to see what people were using. I'm not opposed to running the treadstone unit. I was just looking around and came across one off Ebay, said it supported 850-900hp. I'm not exactly sure what the CX racing unit I used for my single set up was, but I know it couldn't have flowed that well.

samdogmx

iTrader: (14)

another treadstone.

oscs

iTrader: (19)

Hard to beat the value of a treadstone.

01SSRMS

iTrader: (7)

Nice. Pretty much exactly what i need to replicate. Initially I was going to go with the center top exit version but I like how you retained the factory hood latch.

Did you fab up the cold side or buy some miscellaneous tubing and make it work? Thanks

lsx1

I fabbed it all myself, I also cut the 3" outlet off the intercooler and opened up the endtank and welded on a 3 1/2".