slocaddy

Thanks alot! It's been a learning experience with the hydroboost stuff, it was getting tempting just to throw the vaccum booster back on it, but in the grand scheme of things I'm glad I made it work

slocaddy

I've wanted one of these ever since they came out!

slocaddy

Well, got it wired, looks cool, thats pretty much it though......so looks like i will need to do the resistor mod

slocaddy

Well, let me bring something to the table!
This is a simple, solderless way to boost your tach signal


Parts



Slip heat shrink over resistor





Couldnt get any clearer, slip ends of heat shrink inside splice crimp





Signal wire jumped over to 12v power to the tach

slocaddy

So did some more work to the shifter, added a momentary botton for the tow haul


Wires were already under the carpet


Button installed

Suncc49

This is an awesome build man!!

denmah

iTrader: (2)

you posted this on sloppy right!? i love this thing

slocaddy

Thanks A lot man

slocaddy

Yea, a friend of mine posted it, he has the red twin turbo colorado, sweet little truck, I'm not on any social media exept tech lol!

I don't know a thing about tuning, and he was kind enough to help me get it going on a base tune, but it has some idle issues and trans shifting stuff to be worked out, I'm hoping to take it to daytona for the turkey run, so we'll see

Its so fun to hear the turbo noises that shouldn't come from this car lol

slocaddy

Got the third nozzle, maybe more for looks at this point, but should help us find the limit one day lol

jimmyg

I'm interested in the meth kit . Does it have its own map sensor ? Or does it just need a boost / vacuum line from manifold? I'm thinking of getting the same one and replacing my boost gauge with the vc50 controller .

slocaddy

This one uses a tiny vacuum line to the manifold, just seemed like the easyiest way to go

jimmyg

Ya I think I'm gonna get the same one

slocaddy

It's very simple to install, and the gauge is very easy to set up/make changes.
Im very anxious to get it into use=)

slocaddy

Crude, yes.

Works, flawless

Finally got the gas pedal hooked up instead of having to hold it and operate the cable by hand...........

slocaddy

Crunch time, been wrapping up odds and ends, someone is working on a base tune for me .


So ill be using this to monitor some things



New rear meats

slocaddy

Skirt fits too



Proper gauge install......

BudRacing

iTrader: (3)

What's the width on those rear tires? That skirt is a bit of a concern for anything wider.

slocaddy

There 265/50's, bout 9.5"wide, bout as wide as you can fit under her skirt lol

BudRacing

iTrader: (3)

Haha, wow. That angle shows quite the bulge.