aggie91

Forcefed86

I don't think his pressure regulator is boost referenced. I think he has it set at 58psi. Adding a "pressure booster" pump would only help if his regulator was boost referenced.

Is my thinking correct? Or am I missing something here...

408GT

iTrader: (2)

Go to the 38 min mark...

denmah

iTrader: (2)

third pump showed up today

aggie91

Missed that comment about the vacuum line....

aggie91

You commented that getting the block and the two pumps was tight in the video. Do you expect to have any issues get this one in?

Corner Worker

Matt, you honestly thinking about selling the Colorado? I hope you crack off a 5.90 @ 120mph before it goes to a new owner.

viper6549

iTrader: (4)

Matt,

PM me your contact info, I want to chat about buying the Colorado.

denmah

iTrader: (2)

nope this was wayyyyy easier since i did the 90s and staggered the pumps

yes and yes me too

ill send you my email now

Forcefed86

iTrader: (4)

What are you using to supply 3 pumps relay/wiring wise? Looks like 3 pumps would have about a 54A draw at 70psi and 60A 'ish at 100psi. That’s alotta juice! Factory alternator up to it?

SLOW SEDAN

iTrader: (13)

2 of the Walbro 450lph draw 24.7A at 43PSI when we put a meter on them. Rather then spending money on a 3rd pump why not increase the feed line size? 2 of the 450's have supported well over 1000whp when properly setup.

He's only running 22psi so he shouldn't even need to see 70psi in current form. But if he wants to make more power then turn up the boost, should easily make 27-30PSI if that billet wheel is worth anything.

denmah

iTrader: (2)

i have a 100amp breaker and 80 amp relay

douglee25

Any updates?

Corner Worker

According to his recent YouTube video, He is focusing on other projects. Also, he mentioned the truck is forsale $20,000 American buys it. Hopefully he takes it to the track before it sells. Id like to see him rip off a 1/4mi pass that's deep in the 9's. Remember my opinion is only worth what you paid for it.

denmah

iTrader: (2)

correct, currently waiting for tracks to warm up for a hay maker

Corner Worker

You are the man.

I think you will do a major injustice to the sloppy way if it doesn't make a pass with both nitrous kits blazing. If it hooks and doesn't fold the rods like a kitchen towel, I say it goes 9.5 @150 bouncing off the high chip

denmah

iTrader: (2)

itll go 9.50 @140 on boost only 800whp easy
both kits out the back on 1100whp would be out of gear in the 8th lol

should easily clear mid 8s with a crap launch on both kits

brandon6.0

iTrader: (32)

damn!!

Noob44

iTrader: (9)

tick toc, tick toc!

rpturbo

iTrader: (47)

You HAVE to make a GOOD pass before selling that, or I will mail you a bunch of limp d!cks. LOL

Thanks for everything you have done with this truck and the content!!!!

douglee25

Agreed. I'm ready!