My project .
.
I will have xtremelow send you some pics of a bad *** lookin shifter. We did it in gramps small block s-10 with a blazer center console. It fit perfect in the stock shifter location. Its the magnum grip pro stick, looks totaly sick.
Thread Starter
Staging Lane
Joined: Mar 2003
Posts: 86
Likes: 0
From: Houston , TX
Cool , but I'm gonna remove the console too . I'm going an race car territory but still a street car 
.
I can't wait to run my new setup . Its like 1 year without running this truck
.
Geomar
.I can't wait to run my new setup . Its like 1 year without running this truck
. Geomar
Thread Starter
Staging Lane
Joined: Mar 2003
Posts: 86
Likes: 0
From: Houston , TX
I now have pics on the interior (go to the interior album ) :
http://community.webshots.com/user/WickedXtreme
I removed the console , dash , steering wheel and shaft . complete a/c system , etc....
I will put the dash back but i will remove lots of wireing . I don't need wireing for a/c (which is alot of wires just for that ) and no abs , no air bags , etc .
The complete a/c system behind the dash is removed . I still need to remove the seats and carpet so i could get some ligther seats and so we could work on the rollbar too
. There is an nice big space now behind the dash if i later decide to go with an big air/water intercooler . 15x10 wheels with 12.5/28-15 et streets fit nicely in the back so i need to order those too with 15x4 front wheels . I need to order an 9 inch rear housing for S10 lengts and th400 trans . I need to find where in florida i can get all these parts cause thats the closest to Aruba so shipping wouldn't be tooo much .
Ohh and Chris told me i can still get the GMPP single plane intake and i'm getting an elbow with it too . For ati superdamper thats the last thing i will decided if i will go with the camaro style or corvette style . I need to decided which one i can get an better accesories setup and that i could still use the procharger on the driver side . The accesories setup would be powersteering (remote style ) down low on the driver side and the alternator on top on the pasanger side . So i could use the head holes on the driver side to mount a procharger bracket .
Thats all for now
Geomar
http://community.webshots.com/user/WickedXtreme
I removed the console , dash , steering wheel and shaft . complete a/c system , etc....
I will put the dash back but i will remove lots of wireing . I don't need wireing for a/c (which is alot of wires just for that ) and no abs , no air bags , etc .
The complete a/c system behind the dash is removed . I still need to remove the seats and carpet so i could get some ligther seats and so we could work on the rollbar too
. There is an nice big space now behind the dash if i later decide to go with an big air/water intercooler . 15x10 wheels with 12.5/28-15 et streets fit nicely in the back so i need to order those too with 15x4 front wheels . I need to order an 9 inch rear housing for S10 lengts and th400 trans . I need to find where in florida i can get all these parts cause thats the closest to Aruba so shipping wouldn't be tooo much . Ohh and Chris told me i can still get the GMPP single plane intake and i'm getting an elbow with it too . For ati superdamper thats the last thing i will decided if i will go with the camaro style or corvette style . I need to decided which one i can get an better accesories setup and that i could still use the procharger on the driver side . The accesories setup would be powersteering (remote style ) down low on the driver side and the alternator on top on the pasanger side . So i could use the head holes on the driver side to mount a procharger bracket .
Thats all for now
Geomar
