Sweet Pea 1968 Chevy II Moar Door 4.8/7675/PG
#221
9 Second Club
Thread Starter
Join Date: Jan 2013
Location: Just outside Memphis
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
#222
9 Second Club
Thread Starter
Join Date: Jan 2013
Location: Just outside Memphis
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Brand new Holley fuel regulator has a hole in the diaphragm and is leaking fuel directly into the intake through the manifold pressure line. Called Holley to order a new diaphragm and their answer was,”sorry, we don’t sell just the diaphragm, you have to buy a whole new regulator.” ![Icon Rolleyes](https://ls1tech.com/forums/images/smilies2/icon_rolleyes.gif)
![Sweet Pea 1968 Chevy II Moar Door 4.8/7675/PG-8c633efc-bf08-49ff-a510-9b0787992b9f.jpeg](https://ls1tech.com/forums/attachments/forced-induction/700074d1519955043t-sweet-pea-1968-chevy-ii-moar-door-4-8-7675-pg-8c633efc-bf08-49ff-a510-9b0787992b9f.jpeg)
Roger that, I understand. So Sweet Pea will be getting a brand new fuel pressure regulator but it won’t be a Holley.
![Icon Rolleyes](https://ls1tech.com/forums/images/smilies2/icon_rolleyes.gif)
![Sweet Pea 1968 Chevy II Moar Door 4.8/7675/PG-8c633efc-bf08-49ff-a510-9b0787992b9f.jpeg](https://ls1tech.com/forums/attachments/forced-induction/700074d1519955043t-sweet-pea-1968-chevy-ii-moar-door-4-8-7675-pg-8c633efc-bf08-49ff-a510-9b0787992b9f.jpeg)
Roger that, I understand. So Sweet Pea will be getting a brand new fuel pressure regulator but it won’t be a Holley.
#224
8 Second Club
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Holley products and support are horrible! I've had really good luck with this Mallory. (e85 too) Has true 1/2 inlet/return ports as well. Used 3 of them now. Never had an issue over many years. One on my rx7 is like 6 years old now.
https://www.summitracing.com/parts/maa-4305m
https://www.summitracing.com/parts/maa-4305m
Last edited by Forcefed86; 03-01-2018 at 09:15 PM.
#226
9 Second Club
Thread Starter
Join Date: Jan 2013
Location: Just outside Memphis
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Holley products and support are horrible! I've had really good luck with this Mallory. (e85 too) Has true 1/2 inlet/return ports as well. Used 3 of them now. Never had an issue over many years. One on my rx7 is like 6 years old now.
https://www.summitracing.com/parts/maa-4305m
https://www.summitracing.com/parts/maa-4305m
On the bright side, once the new FPR is here, sweet Pea should start and then begins the tuning.
I’m pretty excited.
#227
TECH Resident
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Holley products and support are horrible! I've had really good luck with this Mallory. (e85 too) Has true 1/2 inlet/return ports as well. Used 3 of them now. Never had an issue over many years. One on my rx7 is like 6 years old now.
https://www.summitracing.com/parts/maa-4305m
https://www.summitracing.com/parts/maa-4305m
Hope you get it going soon.
#235
TECH Resident
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hope you don't have problems with the steel wheels and 1/2" studs. There was another Nova on here that was having problems with the studs sheering off.
Here's the link: https://ls1tech.com/forums/conversio...408-ls-16.html
Here's the link: https://ls1tech.com/forums/conversio...408-ls-16.html
Last edited by 408GT; 03-05-2018 at 02:32 PM. Reason: added link
#236
9 Second Club
Thread Starter
Join Date: Jan 2013
Location: Just outside Memphis
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hope you don't have problems with the steel wheels and 1/2" studs. There was another Nova on here that was having problems with the studs sheering off.
Here's the link: https://ls1tech.com/forums/conversio...408-ls-16.html
Here's the link: https://ls1tech.com/forums/conversio...408-ls-16.html