Twin Billet S369 SXE ??
#21
8 Second Club
iTrader: (13)
I agree completely different results and I'm not sure how you couldn't get these things to jam out. Something was certainly amiss in that log you posted, twin S400's spool faster then that 5 second delay. I would certainly be pissed if mine were that laggy but I'm happy with them so far.
#22
I'm just testing on wastegate right now, I can probably get them to spool even faster once I turn the boost controller on. Really not much difference in spool time then my previous single setups.
I agree completely different results and I'm not sure how you couldn't get these things to jam out. Something was certainly amiss in that log you posted, twin S400's spool faster then that 5 second delay. I would certainly be pissed if mine were that laggy but I'm happy with them so far.
I agree completely different results and I'm not sure how you couldn't get these things to jam out. Something was certainly amiss in that log you posted, twin S400's spool faster then that 5 second delay. I would certainly be pissed if mine were that laggy but I'm happy with them so far.
#23
8 Second Club
iTrader: (13)
Subscribed for some track or dyno results. Be nice to see a real world comparison to the S300's, if anyone has made the switch?
I was considering the SXE369's but saw mixed reviews and couldn't find any real results, so I went with the S366's. Might be second guessing my decision now?
I was considering the SXE369's but saw mixed reviews and couldn't find any real results, so I went with the S366's. Might be second guessing my decision now?
#24
8 Second Club
iTrader: (13)
Not sure why anyone would ever leave off idle but I can give that a try, honestly with my setup I cant really leave off idle but I'll get it as close as I can prolly 1200RPM or so. But I doubt that will be any slower to build boost then a second gear roll from 1500RPM, figure first gear from 1200RPM is only going to spool faster. Granted that will be just for ***** as I would leave off the two step in any situation that mattered.
#25
8 Second Club
iTrader: (13)
Doing the slowest launch I can from the lowest rpm ~1100 from the time I touch the gas to the time its hits 15psi its right at 2.5 seconds, that's including the time letting out the clutch. I would normally launch ~4000rpm off the two step in boost drastically reducing that time.
#27
9 Second Club
Any logs showing it going from WOT at say 2300rpm as you say to see how fast it builds boost ?
Obviously nobody really drives like that, but if they're spooling fast in that scenario, it's clearly a good sign.
Obviously nobody really drives like that, but if they're spooling fast in that scenario, it's clearly a good sign.
#29
9 Second Club
I only mentioned 2300rpm as you used it as a reference earlier in the thread, 3k would be fine too, but just trying to get a real world picture of how they perform at the low end.
#30
8 Second Club
iTrader: (13)
So the spool reference isnt real world driving, on the road etc? It's only via a 2step ?
I only mentioned 2300rpm as you used it as a reference earlier in the thread, 3k would be fine too, but just trying to get a real world picture of how they perform at the low end.
I only mentioned 2300rpm as you used it as a reference earlier in the thread, 3k would be fine too, but just trying to get a real world picture of how they perform at the low end.
#31
I'm actually putting together a small build for my daily silverado. And I just bought another set of these with .88 a/r housings, I hope they light off quick like the guy mentioned above!
the setup consists of....
L33 5.3 (re-honed the cylinders/ Gapped the rings)
CNC ported 799 Heads
Twin Billet S369 (.88 a/r turbine housings)
BTR Twin Turbo Stage 2 Cam
E85
4L80e (HD2 Shift kit)
PTC 9.5" Billet Converter
A2A Intercooler
the setup consists of....
L33 5.3 (re-honed the cylinders/ Gapped the rings)
CNC ported 799 Heads
Twin Billet S369 (.88 a/r turbine housings)
BTR Twin Turbo Stage 2 Cam
E85
4L80e (HD2 Shift kit)
PTC 9.5" Billet Converter
A2A Intercooler
Last edited by Ron_Stoppable; 07-30-2017 at 02:14 PM.
#32
9 Second Club
Certainly my billet 64's on a 6.3 dont spool anywhere near as fast as the claims above. If I genuinely thought 69's with the larger turbine would spool much faster, I'd have bought a pair already, but would love to see graphs of boost vs rpm/time from 2300rpm mentioned above.
#40