gols1go

iTrader: (4)

Has anyone routed ovaled exhaust underneath the stock k-member. Wanting to run a 3.5 oval pipe under the k member in order to have full exhaust with a/c. Not really interested in going turbo k member at this time. Pics would be helpful. 3.5" oval pipe is 2.5" tall and 4" wide.

MY_2K_Z

iTrader: (1)

It will scrape for sure with any significant bumps.

Forcefed86

iTrader: (4)

May consider a 3.5” electric dump up front. Then run tiny diameter pipe out back 2.25” is fine. I run 2” on a 370” with a 4” dump. Will be nice and quiet with dump closed and makes packaging easier.

sweet99ss

iTrader: (41)

Just do a fender exit....

Aaron at SDPC

Like mentioned above. You will have major clearance issues even with the oval piping.

BMR Sales2

iTrader: (40)

or you could do a turbo K and not have any worries. up to a 5" downpipe on either side