Borg Warner turbo size
Not sure what's so hard. The videos show everything step by step. Having a BW 2017 catalog handy helps because all the wheel sizes are show. Reference the part number of the turbo and they see the catalog for compressor and turbine wheel size.
Andrew
Andrew
The "S475" prt #171702 doesn't come close on the maps on borg warners website at all for a 346.
Andrew
Here is a pretty good looking match for 14009097014...still sticking with the 87mm turbine and t4 housing. Making 10 psi by 2500RPM with a steady 15 psi to 6000RPM.
The new SXE turbos have much better compressor maps.
The new SXE turbos have much better compressor maps.
max level of boost would be 15-17 pounds
Not a race car.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Here is a pretty good looking match for 14009097014...still sticking with the 87mm turbine and t4 housing. Making 10 psi by 2500RPM with a steady 15 psi to 6000RPM.
The new SXE turbos have much better compressor maps.
The new SXE turbos have much better compressor maps.
Andrew
I think I found it... (177101) $1XXX .... going to have to go back to the dwg board... I can't spend that much right now for a turbo.
you should just get the On3 7875 and call it a day if your on a budget and want to make that power, plenty of positive results with it and it would be a perfect size for your engine/setup IMO
Restricted User
Joined: Mar 2014
Posts: 7,192
Likes: 109
From: Ohio
The T4 S475 from forced inductions is like ~850. Tack on $50 more for the small 83mm wheel. He might work with you on price if you give him a call.
I can't bring myself to that point... I will just wait while I save my money.
On The Tree
Joined: Oct 2012
Posts: 171
Likes: 9
The first turbo you listed can be put into a t4 housing. You can find housings all over the place relatively inexpensive. It should do in the 600s on 15 psi. My little 68/83 borg on 13 psi does 535 tire on 12* of timing and a 3x12 cam in a 5.3.
I'm going to give them a call and see if I can speak to a tech, or send Borg Warner an email and ask them.
What about,
S400SX4 Turbocharger
71mm / 2.80'' Compressor Inducer Dia.
3.94'' Compressor Wheel O.D.
88mm / 3.47'' Turbine Exducer Dia.
96mm / 3.77'' Turbine Wheel O.D.
1.32 Turbine A/R
T6 Twin Flow Turbine Inlet
Straight Compressor Outlet
S400SX4 Turbocharger
71mm / 2.80'' Compressor Inducer Dia.
3.94'' Compressor Wheel O.D.
88mm / 3.47'' Turbine Exducer Dia.
96mm / 3.77'' Turbine Wheel O.D.
1.32 Turbine A/R
T6 Twin Flow Turbine Inlet
Straight Compressor Outlet