Twin Turbo 4.8 Results / Single 80mm Build
#261
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Its a KRC Power Steering pulley, 3.5" diameter. With the stock pulley my voltage would drop to low 12s over 6900. No issues charging at idle. Engine warmed up, fans on, both fuel pumps and lights on it will still hold 13V. I put ARP head bolts on this one.
#262
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks! Yes, I am still using the twin turbo cam in this 5.3, I still have my 4.8 in the garage for back up. Going back out to the track this weekend, hoping to see an 8.6x @ 160.
#264
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Too much has changed for me to really compare the two. The twin set up was in a low compression, iron block 4.8. New set up is an aluminum 5.3 and I've got the dome control now, which I didn't have last year. On the street the new set up is definitely more responsive, but its got a bigger motor, car is lighter etc. One of the main reasons I did the single was to be able to run a full exhaust easier.
#265
TECH Addict
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Too much has changed for me to really compare the two. The twin set up was in a low compression, iron block 4.8. New set up is an aluminum 5.3 and I've got the dome control now, which I didn't have last year. On the street the new set up is definitely more responsive, but its got a bigger motor, car is lighter etc. One of the main reasons I did the single was to be able to run a full exhaust easier.
#266
TECH Fanatic
Thread Starter
#274
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If you scroll back thru some of the old pics there are a few shots of it. The downpipe dumps on the passenger side through an electric cutout. There there is a 2.25" T off the downpipe that goes out to the rear axle with a muffler.
#277
TECH Fanatic
Thread Starter
#278
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Quick update -
Switching up a few things on the car. Mainly going to focus on 1/8th mile racing this year. Got a pile of parts waiting to go in. Bought a BTE cased Powerglide with all the typical good stuff inside it. 1.80 gear set, 8 clutch drum, Vasco input etc. Switching to a 4.10 rear gear. Also ordered a Forced Inductions S485 from Huron Speed.
Setting a goal of 5.25 @ 135 for the season.
![Twin Turbo 4.8 Results / Single 80mm Build-txdcghd.jpg](https://ls1tech.com/forums/attachments/forced-induction/715538d1683232269t-twin-turbo-4-8-results-single-80mm-build-txdcghd.jpg)
Working on a new crossmember.
![Twin Turbo 4.8 Results / Single 80mm Build-j7lbhzs.jpg](https://ls1tech.com/forums/attachments/forced-induction/715539d1683232269t-twin-turbo-4-8-results-single-80mm-build-j7lbhzs.jpg)
![Twin Turbo 4.8 Results / Single 80mm Build-98wubda.jpg](https://ls1tech.com/forums/attachments/forced-induction/715540d1683232269t-twin-turbo-4-8-results-single-80mm-build-98wubda.jpg)
![Twin Turbo 4.8 Results / Single 80mm Build-80ekhrj.jpg](https://ls1tech.com/forums/attachments/forced-induction/715541d1683232269t-twin-turbo-4-8-results-single-80mm-build-80ekhrj.jpg)
![Twin Turbo 4.8 Results / Single 80mm Build-uc4samm.jpg](https://ls1tech.com/forums/attachments/forced-induction/715542d1683232269t-twin-turbo-4-8-results-single-80mm-build-uc4samm.jpg)
Getting rid of all the poly rear suspension bushings
![Twin Turbo 4.8 Results / Single 80mm Build-s7h1xhm.jpg](https://ls1tech.com/forums/attachments/forced-induction/715543d1683232269t-twin-turbo-4-8-results-single-80mm-build-s7h1xhm.jpg)
Making a coolant expansion tank as well
![Twin Turbo 4.8 Results / Single 80mm Build-b0pm7uc.jpg](https://ls1tech.com/forums/attachments/forced-induction/715544d1683232269t-twin-turbo-4-8-results-single-80mm-build-b0pm7uc.jpg)
Switching up a few things on the car. Mainly going to focus on 1/8th mile racing this year. Got a pile of parts waiting to go in. Bought a BTE cased Powerglide with all the typical good stuff inside it. 1.80 gear set, 8 clutch drum, Vasco input etc. Switching to a 4.10 rear gear. Also ordered a Forced Inductions S485 from Huron Speed.
Setting a goal of 5.25 @ 135 for the season.
![Twin Turbo 4.8 Results / Single 80mm Build-txdcghd.jpg](https://ls1tech.com/forums/attachments/forced-induction/715538d1683232269t-twin-turbo-4-8-results-single-80mm-build-txdcghd.jpg)
Working on a new crossmember.
![Twin Turbo 4.8 Results / Single 80mm Build-j7lbhzs.jpg](https://ls1tech.com/forums/attachments/forced-induction/715539d1683232269t-twin-turbo-4-8-results-single-80mm-build-j7lbhzs.jpg)
![Twin Turbo 4.8 Results / Single 80mm Build-98wubda.jpg](https://ls1tech.com/forums/attachments/forced-induction/715540d1683232269t-twin-turbo-4-8-results-single-80mm-build-98wubda.jpg)
![Twin Turbo 4.8 Results / Single 80mm Build-80ekhrj.jpg](https://ls1tech.com/forums/attachments/forced-induction/715541d1683232269t-twin-turbo-4-8-results-single-80mm-build-80ekhrj.jpg)
![Twin Turbo 4.8 Results / Single 80mm Build-uc4samm.jpg](https://ls1tech.com/forums/attachments/forced-induction/715542d1683232269t-twin-turbo-4-8-results-single-80mm-build-uc4samm.jpg)
Getting rid of all the poly rear suspension bushings
![Twin Turbo 4.8 Results / Single 80mm Build-s7h1xhm.jpg](https://ls1tech.com/forums/attachments/forced-induction/715543d1683232269t-twin-turbo-4-8-results-single-80mm-build-s7h1xhm.jpg)
Making a coolant expansion tank as well
![Twin Turbo 4.8 Results / Single 80mm Build-b0pm7uc.jpg](https://ls1tech.com/forums/attachments/forced-induction/715544d1683232269t-twin-turbo-4-8-results-single-80mm-build-b0pm7uc.jpg)