Fuel system set up
Fuel system set up Got an S480 5.3 yadda yadda
Setting up my fuel system
I wanted it to be 2 -10 feeds to each pump (AEM 380)
2 -8AN outlet into a -10 Y
-8 Y at the rails
-10 Return
With getting filters and everything to fit in rear of the car the -10 did not work
Was going to mount the pumps along the subframe but the 044 style pumps aren’t the best for pulling fuel that far
So my question is
Can I switch to a Dual -8 Feed and not become an issue?
Fuel will be E85 and the power should be right at 900-950 wheel
Setting up my fuel system
I wanted it to be 2 -10 feeds to each pump (AEM 380)
2 -8AN outlet into a -10 Y
-8 Y at the rails
-10 Return
With getting filters and everything to fit in rear of the car the -10 did not work
Was going to mount the pumps along the subframe but the 044 style pumps aren’t the best for pulling fuel that far
So my question is
Can I switch to a Dual -8 Feed and not become an issue?
Fuel will be E85 and the power should be right at 900-950 wheel
TECH Fanatic
Joined: Oct 2015
Posts: 1,280
Likes: 28
From: Pittsboro, IN
Oh maybe I misunderstood. My AEM gets a -10AN off the sump and I've got a Walbro 450 in tank, they come together at an 8AN Y and a single 8AN runs to the rail. 8AN feed to the pumps should work fine.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Yeah I can't see with each pump getting their own -8 that it'd be an issue, The pumps in reality are a -10 to -6 so so don't think it'd be an issue with the same size inlet and outlet causing vacuum,
I picked up some 90 degree -8AN filters that I think will fix my issue with space, With the other filters and such by the time you get 2 fittings on each end of -10 stuff you're taking up some space.
I picked up some 90 degree -8AN filters that I think will fix my issue with space, With the other filters and such by the time you get 2 fittings on each end of -10 stuff you're taking up some space.
