7.0@199 goal for 2019 Street driven turbo 4th gen
#203
TECH Fanatic
Thread Starter
Midwest chassis extreme weld in.
1.23 60 from the passes from the first day I noticed the car twisting. So now that Im hitting it with power sooner it lasted a few 1.teen passes. on the 4th pass going into the teens it bent completely.
1.23 60 from the passes from the first day I noticed the car twisting. So now that Im hitting it with power sooner it lasted a few 1.teen passes. on the 4th pass going into the teens it bent completely.
Last edited by BlackSS4thgen; 04-29-2019 at 08:04 PM.
#206
9 Second Club
#208
9 Second Club
They all use same crank, cam, bearings etc ? So losses should be the same ? Or if not, why are they so different ?
#214
TECH Fanatic
Thread Starter
Yes. Still working on bringing it in as quick as I can. I had a 1.2 ramp and 5 degrees pulled from .4-.8 for timing retard after launch.
Forgot my weight ballast at home. So started driving into wheelies Bringing that Ramp in any further.
Trying to get 1.11-1.13 before I turn the boost up anymore.
Forgot my weight ballast at home. So started driving into wheelies Bringing that Ramp in any further.
Trying to get 1.11-1.13 before I turn the boost up anymore.
#215
TECH Veteran
What pinion angle on the torque arm ?
That 1.17 60ft is just badass brother.
That 1.17 60ft is just badass brother.