When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I got tired of no one selling a Holley digital dash mount for our cars so I fabricated my own. I work for a CNC Fiber optic laser cutting business so I have the chance to fabricate my own parts. The dash is cut from .080" T6061 alumunim so it is super lightweight and rigid. I cut two sets of mounting holes for this one but only needed the inner so I will delete the outer holes fromy my CAD file and recut Monday. IF anyone is interested in these let me know and send me a PM or text 775-741-8317. I'm going to cut another one Monday and then anodize it black. This fits on the car perfectly and mounts to the factory cluster screws like it came from GM.
I have been wanting to clean this up for a while now. Currently it’s just a leather curtain as a work around. Dig Dash is just mounted to fabricated bar.
Pricing will be $90 plus $12 flat rate anywhere in the 48 in bare 6061 aluminum. I have a few pics installed with my old outer bezel that was cut before. You will not need to cut your bezel with this mount. Here is also another pic without the outer holes that you can see in the first pic. I will get some of these anodized but its been low on the totem pole at the moment. The pic installed is black paint.
Pricing will be $90 plus $12 flat rate anywhere in the 48 in bare 6061 aluminum. I have a few pics installed with my old outer bezel that was cut before. You will not need to cut your bezel with this mount. Here is also another pic without the outer holes that you can see in the first pic. I will get some of these anodized but its been low on the totem pole at the moment. The pic installed is black paint.
Wonder if this will fit with the dash bar from my roll cage in the way. You wouldn’t happen to know if the 6.86 or 12” will mount to this play do you?
the 7” just doesn’t have value anymore to me because the 6.8 has built in gps. 7” you have to spend more money to get the god added in
So I got tired of no one selling a Holley digital dash mount for our cars so I fabricated my own. I work for a CNC Fiber optic laser cutting business so I have the chance to fabricate my own parts. The dash is cut from .080" T6061 alumunim so it is super lightweight and rigid. I cut two sets of mounting holes for this one but only needed the inner so I will delete the outer holes fromy my CAD file and recut Monday. IF anyone is interested in these let me know and send me a PM or text 775-741-8317. I'm going to cut another one Monday and then anodize it black. This fits on the car perfectly and mounts to the factory cluster screws like it came from GM.
08-24-2019, 10:26 AM
Holley Digital Dash Mount Prototype 
