How to set a bov?
#1
Launching!
Thread Starter
Join Date: Oct 2002
Location: Tulsa, OK/Gainesville, Fl
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
How to set a bov? adjuster screw tightened all the way and still leaking
Rob told me in another thread that my bov needed to be set properly before it can be tuned right. So how do you set an HKS blow off valve? detailed instructions anyone please?
Last edited by vhgjk123; 08-27-2004 at 02:47 PM.
#3
Launching!
Thread Starter
Join Date: Oct 2002
Location: Tulsa, OK/Gainesville, Fl
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply. They tell you just to tighten down the screw which would normally be perfectly fine.
However, even with the screw tightened down completely, the bov is still leaking. The spring is the 7-14lbs of boost spring and I am running 7lbs so that shouldnt be a problem. I am completely lost and this is the only thing keeping me from getting my car tuned so I can have a good running car. I have been dealing with this for like 2 weeks with no solution. Please help.
However, even with the screw tightened down completely, the bov is still leaking. The spring is the 7-14lbs of boost spring and I am running 7lbs so that shouldnt be a problem. I am completely lost and this is the only thing keeping me from getting my car tuned so I can have a good running car. I have been dealing with this for like 2 weeks with no solution. Please help.