Car update!
Thread Starter
TECH Fanatic
Joined: Oct 2002
Posts: 1,648
Likes: 0
From: F.H,Waterford,Port Huron, MI
Car update! Well it has been a long time but it is getting real close! All the fuel lines are done, rear end is 99% done,and 2 more NOS lines. Oh and the Accel GEN7 wires are next! I hope this month! I still need to rewire the hole car and install the carpet seats and panels. I am hoping for 600hp on turbos and another 200hp with the NOS!The 55lb injectors are now the weak link,but will work with the power. We will see.......
http://community.webshots.com/album/149789497hUSMrO
http://community.webshots.com/album/149789497hUSMrO
Thread Starter
TECH Fanatic
Joined: Oct 2002
Posts: 1,648
Likes: 0
From: F.H,Waterford,Port Huron, MI
The build up is
348ci LS6 motor
JE pistons Crower billet rods
Incon turbo kit w/ different turbos and fabed down tubes and 3" stainless exhaust
Nos is a dual kit (2 bottles 10lb) plan on 100hp and 50hp!
12bolt
Weldon pump
Aeromotive pro regulator, pump rpm box, and filters
Speed Inc. Tank and rails
55lb injectors
-10an feed to -8an return
Accel Gen7 DFI w/ wide band O2
Every BMR part they sell...
This will be a STREET CAR on 315 nittos! Only so hoping for a high 10sec ET!
348ci LS6 motor
JE pistons Crower billet rods
Incon turbo kit w/ different turbos and fabed down tubes and 3" stainless exhaust
Nos is a dual kit (2 bottles 10lb) plan on 100hp and 50hp!
12bolt
Weldon pump
Aeromotive pro regulator, pump rpm box, and filters
Speed Inc. Tank and rails
55lb injectors
-10an feed to -8an return
Accel Gen7 DFI w/ wide band O2
Every BMR part they sell...
This will be a STREET CAR on 315 nittos! Only so hoping for a high 10sec ET!
Thread Starter
TECH Fanatic
Joined: Oct 2002
Posts: 1,648
Likes: 0
From: F.H,Waterford,Port Huron, MI
Originally Posted by smokinHawk
nice, what size turbos are those?
The only other problem is the intercoolers I need to switch to one big *** front mount but don't want to remove the support and foam! Well I can live with 600hp one turbos!
Trending Topics
Thread Starter
TECH Fanatic
Joined: Oct 2002
Posts: 1,648
Likes: 0
From: F.H,Waterford,Port Huron, MI
Yes 37R was the one just a bigger chra! Was told it is only good for another 30hp at best.
Car has no a/c,air bags,seats are 2 sparco's, no wires,ect....
And with the new 3"stainless exhaust w/down tubes we saved at least 25lb. I weighted one of the cast down tubes at 7lb!
I am hoping to be at thunder shootout just for fun! As well as Autorama.
Car has no a/c,air bags,seats are 2 sparco's, no wires,ect....
And with the new 3"stainless exhaust w/down tubes we saved at least 25lb. I weighted one of the cast down tubes at 7lb!
I am hoping to be at thunder shootout just for fun! As well as Autorama.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
