Front Mount for STS started
#41
Thread Starter
TECH Addict
well for low boost at least so far this thing is the shizzle.
Got an update phone call from the owner of the TA in the pics and he did a little highway blast this morning and the inlet temps actually went down I guess due to all the air rushing past as the car went faster. Start of the run they were 78, end they were 73.
hopefully he will be ready to turn up the wick this weekend and we will see how good it does at ~10psi
man I gotta find time to install my shizzle this is killing me
Got an update phone call from the owner of the TA in the pics and he did a little highway blast this morning and the inlet temps actually went down I guess due to all the air rushing past as the car went faster. Start of the run they were 78, end they were 73.
hopefully he will be ready to turn up the wick this weekend and we will see how good it does at ~10psi
man I gotta find time to install my shizzle this is killing me
#42
TECH Enthusiast
Joined: Aug 2003
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
From: Downers Grove,IL
Excellent IAT numbers!
Just got my OBX FMIC yesterday. For the money this intercooler looks great! I'll be pumping 12psi though it.
Since I already have a water tank and pump installed in the rear from my old DIY water/air unit, I may as well fab up a nice intercooler sprayer system also.
Cool boost here we come!
Steve
Just got my OBX FMIC yesterday. For the money this intercooler looks great! I'll be pumping 12psi though it.
Since I already have a water tank and pump installed in the rear from my old DIY water/air unit, I may as well fab up a nice intercooler sprayer system also.
Cool boost here we come!
Steve
#43
Thread Starter
TECH Addict
this bad boy continues to impress.
It was 95-100 degrees out over labor day weekend here.
Owner hit the road and inlet temps were 95, little 3rd gear blast at 5psi and temps hit 98.
Sweet Can't wait to start my install this week.
It was 95-100 degrees out over labor day weekend here.
Owner hit the road and inlet temps were 95, little 3rd gear blast at 5psi and temps hit 98.
Sweet Can't wait to start my install this week.
#45
Originally Posted by NA$TY-TA
.... i hope to be ablet finish mine up this fri, and sat.
Kyle
Kyle
#49
TECH Senior Member
iTrader: (16)
Originally Posted by sagres
You think you can do a write up on this IC install and what was needed and problems encountered for us other asses going to tackle this.
This post has plenty of pics to give you the jist of how things go. Its really pretty simple to do.
https://ls1tech.com/forums/forced-induction/212233-fmic-going-pic-s.html
J
#52
10-Second Club
iTrader: (6)
Joined: Jul 2002
Posts: 1,555
Likes: 0
Received 0 Likes
on
0 Posts
From: Spring, TX
I can't tell from the pics, but are you going to have to relocate the battery for that setup? I'm about to get an STS myself & also want a FMIC....Nice car BTW, reminds me of someone elses I know