OBX intercooler size
OBX intercooler size Can some one that has one of these confirm this is the size you used. Just wanted to make sure this is the correct size to order before I spend the cash.
OBX intercooler
Dimensions - 23" wide (31" with endtanks), 11.75" tall, 3" thick
Endtanks diameter - 3"
Thank you
OBX intercooler
Dimensions - 23" wide (31" with endtanks), 11.75" tall, 3" thick
Endtanks diameter - 3"
Thank you
12 Second Truck Club
Joined: Feb 2002
Posts: 5,574
Likes: 0
From: Sacramento, CA
That is about what I measured. I think the widest point was 30.5" and the shortest was 25" or so... The IC has 4 welded blot mounts on the top and bottom. Total height from tip of each bolt location is 13"
Originally Posted by F8L Z71
That is about what I measured. I think the widest point was 30.5" and the shortest was 25" or so... The IC has 4 welded blot mounts on the top and bottom. Total height from tip of each bolt location is 13"
Who knows.Wolfee
12 Second Truck Club
Joined: Feb 2002
Posts: 5,574
Likes: 0
From: Sacramento, CA
Originally Posted by Wolfee
Thanks man, I was hoping one of the F-bod guys would speak up that have the the front mount too! I've read all the posts but none of them stated which size they were running. Maybe they all take it for granted that this is THE size or something. Who knows.
Wolfee
Who knows.Wolfee
Well I'm a f-body guy that just signed on now Sorry we weren't at your beck and call. Yes thats the same one we are running. Have some patience, or do a search, I listed the size of it in my first post about this particular FMIC.
Sorry we weren't at your beck and call. Yes thats the same one we are running. Have some patience, or do a search, I listed the size of it in my first post about this particular FMIC.
Originally Posted by frcefed98
Well I'm a f-body guy that just signed on now Sorry we weren't at your beck and call. Yes thats the same one we are running. Have some patience, or do a search, I listed the size of it in my first post about this particular FMIC.
Sorry we weren't at your beck and call. Yes thats the same one we are running. Have some patience, or do a search, I listed the size of it in my first post about this particular FMIC. I didn't remember seeing any sizes ever stated but I don't doubt you a bit. I do appreciate your help and I have enjoied reading your updates. So tell me, how fast was your car at the track? I'd love to hear the information.Wolfee
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo NO problem
I get impatient too sometimes
Latest video after the OBX FMIC,
http://home.comcast.net/~jsbird1998/fmic.mov
Had to baby it out of the hole on that pass, track never hooks (1.88 60ft)
Have some ET drags coming from houston this week, and going to install some new gears as my current 3.73's are toast. Then I should be able to hook better.
J
I get impatient too sometimesLatest video after the OBX FMIC,
http://home.comcast.net/~jsbird1998/fmic.mov
Had to baby it out of the hole on that pass, track never hooks (1.88 60ft)
Have some ET drags coming from houston this week, and going to install some new gears as my current 3.73's are toast. Then I should be able to hook better.
J
Originally Posted by frcefed98
NO problem I get impatient too sometimes
Latest video after the OBX FMIC,
http://home.comcast.net/~jsbird1998/fmic.mov
Had to baby it out of the hole on that pass, track never hooks (1.88 60ft)
Have some ET drags coming from houston this week, and going to install some new gears as my current 3.73's are toast. Then I should be able to hook better.
J
I get impatient too sometimesLatest video after the OBX FMIC,
http://home.comcast.net/~jsbird1998/fmic.mov
Had to baby it out of the hole on that pass, track never hooks (1.88 60ft)
Have some ET drags coming from houston this week, and going to install some new gears as my current 3.73's are toast. Then I should be able to hook better.
J
Wolfee