Inspector12

iTrader: (29)

I was looking at the different S/C available from Vortech and was wondering if anyone has done this and if so what were your results or findings? The G-trim is rated at 575fwhp and 800cfm's the S-Trim is rated at 680fwhp and 1000 cfm's. Just playing with a few different ideas other than a T-trim, because of the clearance issues with the T-trim. And Also wanting to know what modifications I would need to do if any.

2001WS6Vert

The S-trim is the same size as the T-trim.

MECHAM

iTrader: (4)

if you have the RMCR brackets..it will hold the STRIM and TTRIM both with no modifications to the bracket.

Inspector12

iTrader: (29)

Thanks guys!

MelloYellow

Is the RMCR SC setup clockwise or counter-clockwise? The standard Vortech F-Body kit is clockwise.

2001WS6Vert

The blower sits in the same place as the standard kit. Keep in mind that RMCR also can make the YSi fit there too and they are fabbing up a 4" intake tube soon to go with it.

screamn03

Who is RMCR? Does anyone have a link to their website?

EDIT:

Found it-> http://www.rmcrperformance.com/

mike m

iTrader: (6)

Heres a pic of my YS mounted up top. RMCR did my brackets.