I'll even put a huge APE sticker on my back window! 
Tommorrow She Goes In The Car
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
TECH Enthusiast
Joined: Jan 2004
Posts: 633
Likes: 1
From: Detroit,MI
Firstly, we are running a remote water pump that is mounted in the inner fender of the car.
We plan to make 1300hp with this combo, but Procharger tells us we may be as much as 1600hp if we can keep head gaskets in her.
It is a 359ci Iron Block with the F-2 strapped to it for good luck. That is also a 5/8" motor plate we are using so we can hang the 35lb blower off the front.
We plan to make 1300hp with this combo, but Procharger tells us we may be as much as 1600hp if we can keep head gaskets in her.
It is a 359ci Iron Block with the F-2 strapped to it for good luck. That is also a 5/8" motor plate we are using so we can hang the 35lb blower off the front.
Thread Starter
TECH Enthusiast
Joined: Jan 2004
Posts: 633
Likes: 1
From: Detroit,MI
She won't fire today, but the engine has the tranny mounted to it and is moments away from going in the car. We still have to fabricate the plumbing for the intercooler once the engine is in. We have a solid week or so of working on her after-hours before she is 100%
