FMIC Kit for STS Sale
Thread Starter
TECH Enthusiast
iTrader: (8)
Joined: Oct 2002
Posts: 705
Likes: 0
From: Fort Lauderdale
FMIC Kit for STS Sale We have one of these ready to ship for anyone that wants it. It would be a direct bolt on FMIC for the sts kit. This FMIC kit comes with FMIC mounted, FMIC bottom mounts, pipes, hose, hose clamps, side bumper supports....
Basically everything you need for an easy install. All that is needed is to cut the STS pipe in one spot and connect the FMIC pipes.
On 9psi in 88 degree weather, after 3 consecutive runs, we saw the intake temps reach no more than 98 degrees. Didnt even once climb over 100!!
Pictures here:
https://ls1tech.com/forums/forced-induction/225513-sts-fmic-camaro-ss-complete.html
PM for information. Grille also available.
Basically everything you need for an easy install. All that is needed is to cut the STS pipe in one spot and connect the FMIC pipes.
On 9psi in 88 degree weather, after 3 consecutive runs, we saw the intake temps reach no more than 98 degrees. Didnt even once climb over 100!!
Pictures here:
https://ls1tech.com/forums/forced-induction/225513-sts-fmic-camaro-ss-complete.html
PM for information. Grille also available.
Cool send me a cut of the $$ for showing you guys the FMIC w/ bumper support install procedure K Thanks...always nice to see a sponsor rip an idea off a member and sell it on the board....seems kinda unethical. Glad a lot of you members were able to do this on your own with the help of my pictures and write up and not trying to profit off of it. JL turbo just went down a notch to LS1.com level for me. I posted those pics and info for the benefit of the members on this board, not for sponsors to profit off of it. If you sell these kits with FMIC mounted in this fashion then do it at your shop as an option to your customers, not here....talk about a kick in the ***** to a LONG TIME MEMBER and CONTRIBUTOR to LS1TECH's FI SECTION.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
TECH Enthusiast
iTrader: (8)
Joined: Oct 2002
Posts: 705
Likes: 0
From: Fort Lauderdale
Ahhhh just FYI frcefed and Merlin you need to think a little before you speak. I am selling the one that is actually on my car because my car was a project and the project is possibly over and moving on to a diff vehicle and I am parting it out. Although the thought had crossed my mind, I really dont intend to offer these kits. Really just if someone comes to me asking me to.
I appreciate the pics and everything, they were a great help and I along with other really found them useful, but there is a little something that bothers me about what you said...now I too have posted pics...probably more pics than you...I would say around 20 pics total. I think this gives people an idea of how to do it themselves. I even offered some advice to people who PM'd me and asked about doing it themselves. So if someone wants to do it, great, but if someone wants to buy a complete make of the FMIC setup, then shouldnt they be aloud to? Many would find a kit very useful. In fact, I believe it would greatly help people out there that cannot do this type of work themselves, and trust me, most people do not have the tools for it.
Also, how are my brackets anything like anyone else's?
https://ls1tech.com/forums/forced-induction/223253-fmic-meets-sts-camaro-ss.html
I appreciate the pics and everything, they were a great help and I along with other really found them useful, but there is a little something that bothers me about what you said...now I too have posted pics...probably more pics than you...I would say around 20 pics total. I think this gives people an idea of how to do it themselves. I even offered some advice to people who PM'd me and asked about doing it themselves. So if someone wants to do it, great, but if someone wants to buy a complete make of the FMIC setup, then shouldnt they be aloud to? Many would find a kit very useful. In fact, I believe it would greatly help people out there that cannot do this type of work themselves, and trust me, most people do not have the tools for it.
Also, how are my brackets anything like anyone else's?
https://ls1tech.com/forums/forced-induction/223253-fmic-meets-sts-camaro-ss.html
https://ls1tech.com/forums/showthrea...highlight=FMIC
https://ls1tech.com/forums/showpost....0&postcount=35
No one posts more pics than me lol....those are just the ones i'm hosting still, more were taken down as I needed the space on my server, there were more. IT covers the complete install to the bumper support. I've sent those photos out to quite a few members alot of which have posted their pics and results with thanks and props to who helped em, me. I continue to dole this pics out as well as thats the purpose for them to help others do this for themselves as its easy and inexpensive to do, if you want to do it your self.
But:
I misread your post, I thought you were going mainstream with these kits. Just wanted to make sure that the info posted for all wasn't going to be profitted(sp?) off of. I appologize for coming off harsh and misunderstanding your intent in the original post. I'm wrong. I do thank Merlin as he is a true bud and I will also back him. Thanks to those that showed quiet support in PM's.
And I do like those brackets, makes it easy for people who don't weld. But I complimented you in your original pics post.
J
https://ls1tech.com/forums/showpost....0&postcount=35
No one posts more pics than me lol....those are just the ones i'm hosting still, more were taken down as I needed the space on my server, there were more. IT covers the complete install to the bumper support. I've sent those photos out to quite a few members alot of which have posted their pics and results with thanks and props to who helped em, me. I continue to dole this pics out as well as thats the purpose for them to help others do this for themselves as its easy and inexpensive to do, if you want to do it your self.
But:
I misread your post, I thought you were going mainstream with these kits. Just wanted to make sure that the info posted for all wasn't going to be profitted(sp?) off of. I appologize for coming off harsh and misunderstanding your intent in the original post. I'm wrong. I do thank Merlin as he is a true bud and I will also back him. Thanks to those that showed quiet support in PM's.
And I do like those brackets, makes it easy for people who don't weld. But I complimented you in your original pics post.
J
Originally Posted by frcefed98
https://ls1tech.com/forums/showthrea...highlight=FMIC
https://ls1tech.com/forums/showpost....0&postcount=35
No one posts more pics than me lol....those are just the ones i'm hosting still, more were taken down as I needed the space on my server, there were more. IT covers the complete install to the bumper support. I've sent those photos out to quite a few members alot of which have posted their pics and results with thanks and props to who helped em, me. I continue to dole this pics out as well as thats the purpose for them to help others do this for themselves as its easy and inexpensive to do, if you want to do it your self.
But:
I misread your post, I thought you were going mainstream with these kits. Just wanted to make sure that the info posted for all wasn't going to be profitted(sp?) off of. I appologize for coming off harsh and misunderstanding your intent in the original post. I'm wrong. I do thank Merlin as he is a true bud and I will also back him. Thanks to those that showed quiet support in PM's.
And I do like those brackets, makes it easy for people who don't weld. But I complimented you in your original pics post.
J
https://ls1tech.com/forums/showpost....0&postcount=35
No one posts more pics than me lol....those are just the ones i'm hosting still, more were taken down as I needed the space on my server, there were more. IT covers the complete install to the bumper support. I've sent those photos out to quite a few members alot of which have posted their pics and results with thanks and props to who helped em, me. I continue to dole this pics out as well as thats the purpose for them to help others do this for themselves as its easy and inexpensive to do, if you want to do it your self.
But:
I misread your post, I thought you were going mainstream with these kits. Just wanted to make sure that the info posted for all wasn't going to be profitted(sp?) off of. I appologize for coming off harsh and misunderstanding your intent in the original post. I'm wrong. I do thank Merlin as he is a true bud and I will also back him. Thanks to those that showed quiet support in PM's.
And I do like those brackets, makes it easy for people who don't weld. But I complimented you in your original pics post.
J
I know man..... i thank ya for the idea.. i know i couldnt of done it with out your help or pics...... 
Kyle
Thread Starter
TECH Enthusiast
iTrader: (8)
Joined: Oct 2002
Posts: 705
Likes: 0
From: Fort Lauderdale
frcfed, no prob dude, but you should have just taken it up straight with me. Whatever no big deal. The credit for the FMIC definately belongs to you. Yeah you have a nice picture set! I didnt see the ones of the red TA, but I did see the green. Mostly I owe credit to NA$TY for answering questions I had along the way but I guess he got it from you?
Yeah thanks for the bracket compliment.
Yeah thanks for the bracket compliment.
Props to you Jer u know i give them to you......
Fun chatting with you on AIM Jesse.... i had to go... these long *** days at work kinda suck..... but at least there less then the last three months.... 13 hr days start to add up on ya.... I know Jer is feeling it..... u hire more people yet buddy?
Kyle
Fun chatting with you on AIM Jesse.... i had to go... these long *** days at work kinda suck..... but at least there less then the last three months.... 13 hr days start to add up on ya.... I know Jer is feeling it..... u hire more people yet buddy?
Kyle
This upgrade is variable so let us know what you want and we will do it. Yes, we were thinking of offering a true bolt-on FMIC kit. Contact us if you are interested and let us know exactly what you want. It will be customized to suit your needs.
__________________
I just found this. If you are not going to sell the kit as an upgrade, Why tell someone this?
I don't know how to post a thread but if you do a thread search for SSnakekiller you'll find it on the " FMIC STS Camaro SS Completed".
__________________
I just found this. If you are not going to sell the kit as an upgrade, Why tell someone this?
I don't know how to post a thread but if you do a thread search for SSnakekiller you'll find it on the " FMIC STS Camaro SS Completed".
Thread Starter
TECH Enthusiast
iTrader: (8)
Joined: Oct 2002
Posts: 705
Likes: 0
From: Fort Lauderdale
Originally Posted by Richiec77
This upgrade is variable so let us know what you want and we will do it. Yes, we were thinking of offering a true bolt-on FMIC kit. Contact us if you are interested and let us know exactly what you want. It will be customized to suit your needs.
__________________
I just found this. If you are not going to sell the kit as an upgrade, Why tell someone this?
I don't know how to post a thread but if you do a thread search for SSnakekiller you'll find it on the " FMIC STS Camaro SS Completed".
__________________
I just found this. If you are not going to sell the kit as an upgrade, Why tell someone this?
I don't know how to post a thread but if you do a thread search for SSnakekiller you'll find it on the " FMIC STS Camaro SS Completed".
Yes, like I said, if someone wants us to make one, it will have to be customized, hence when I said 'variable'. This, instead of making a bunch of them and putting them up for sale. Notice we still have no info of this on our web page. And as I said, if someone wants to do it themselves, there are plenty of pics posted by frcfed and na$ty and myself. If someone comes to us and says, Jesse I want one of those FMIC with my STS kit, then we will talk. Get it?