Vortech YS install pics.
#21
LS1Tech Co-Founder
iTrader: (34)
I have:
T400 with 4500 yank,
3.50 gear,
348ci 8:1 engine,
6.0 heads,
Kooks headers,
X pipe with Magnaflows dumped,
83 lb siemens injectors,
2 bosch 420L pumps
-----------------------------
I made 17psi with the YS, have since stepped up cam and to YSi... dropped compression, and am seeing 19-21 psi with 8.00 base kit crank + 2.85 blower. The 2.95 is one step bigger than mine, I think you will hit 16-18psi assuming no issues.
T400 with 4500 yank,
3.50 gear,
348ci 8:1 engine,
6.0 heads,
Kooks headers,
X pipe with Magnaflows dumped,
83 lb siemens injectors,
2 bosch 420L pumps
-----------------------------
I made 17psi with the YS, have since stepped up cam and to YSi... dropped compression, and am seeing 19-21 psi with 8.00 base kit crank + 2.85 blower. The 2.95 is one step bigger than mine, I think you will hit 16-18psi assuming no issues.
#22
TECH Fanatic
Thread Starter
iTrader: (6)
Join Date: Nov 2001
Location: Las Vegas
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pro Stock John
I have:
T400 with 4500 yank,
3.50 gear,
348ci 8:1 engine,
6.0 heads,
Kooks headers,
X pipe with Magnaflows dumped,
83 lb siemens injectors,
2 bosch 420L pumps
-----------------------------
I made 17psi with the YS, have since stepped up cam and to YSi... dropped compression, and am seeing 19-21 psi with 8.00 base kit crank + 2.85 blower. The 2.95 is one step bigger than mine, I think you will hit 16-18psi assuming no issues.
T400 with 4500 yank,
3.50 gear,
348ci 8:1 engine,
6.0 heads,
Kooks headers,
X pipe with Magnaflows dumped,
83 lb siemens injectors,
2 bosch 420L pumps
-----------------------------
I made 17psi with the YS, have since stepped up cam and to YSi... dropped compression, and am seeing 19-21 psi with 8.00 base kit crank + 2.85 blower. The 2.95 is one step bigger than mine, I think you will hit 16-18psi assuming no issues.
224-230 567-591 on a 115+5. Im just hoping to stay away from aftermarket computers like fast. But I am willing to switch to it if need be.
#25
10 & 11 Second Club
iTrader: (2)
Join Date: Nov 2002
Location: Orlando Fl.
Posts: 2,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mike m
well the install is complete, I just need to cut the hood a lil bit. has anyone here with a T trim upgrade had to cut the hood where the maf sits?
#27
TECH Fanatic
Thread Starter
iTrader: (6)
Join Date: Nov 2001
Location: Las Vegas
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Caveman
That new style aftercooler that you talked about, who is makling it Vortech or RMCR?
RMCR is going to make the aftercooler.
Thanks for the info guys. Im going to cut the stock hood and see if it helps, if not ill buy one of those bad *** VFN hoods. As for the injectors, im expecting to only see about 16-18lbs of boost. When I bring it to get tuned Ill see what happens. Who sells the motron 60lbers?
#29
TECH Fanatic
Thread Starter
iTrader: (6)
Join Date: Nov 2001
Location: Las Vegas
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Caveman
Speed Inc. sells them,( and I`m sure other sponsors do also). They have good customer service and good prices.
Yes I agee Speed Inc, is great, I bought all of my fuel system through them.
#31
10 Second Club
iTrader: (4)
I'd control it threw a BSIII like PSJ did Mike...but then again alot of guys are making serious power on stock electronics so I guess 650RW shouldnt be a problem.I'd love to have gone boost type setup but I'm on a budget.Still 10.80's on motor isnt too bad,I could always spray myself into the 9;s...
#32
TECH Fanatic
Thread Starter
iTrader: (6)
Join Date: Nov 2001
Location: Las Vegas
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
I ordered the impadence convertor from spped inc. Im going to buy the 83lb injectors. My tuner uses this combo on a alot of F1 procharged corvettes and is able to use the stock pcm everytime. But all cars are different im hoping it works out.
#35
9 Second Club
FJO and Acceleronics make convertors. I think the FJO is directed towards 4 cyl cars though, whereas the acceleronics has 8 channels
http://www.acceleronics.com/faq.htm
http://fjoinc.com/
http://www.acceleronics.com/faq.htm
http://fjoinc.com/