tip for a supercharger
tip for a supercharger i read that if ou belt is slipping when making 1/4 mile passes just put a little vht on the underside of the belt that touches the pulleys and that should fix it for a few runs.
TECH Fanatic
Joined: Nov 2001
Posts: 1,986
Likes: 1
From: Centrifugal City
I've heard of people doing that for back to back dyno runs. On the street/track, belt dressing is definitely a band-aid for poor wrap/tension.
Dynojets are harder on belts than the street is. The RPM's tach up faster and the belt rev's faster which causes more belt slip and orbiting/jumping issues.
Another note: Alum flywheels can have a minor effect of exacerbating belt issues by rev'ing faster too.
Dynojets are harder on belts than the street is. The RPM's tach up faster and the belt rev's faster which causes more belt slip and orbiting/jumping issues.
Another note: Alum flywheels can have a minor effect of exacerbating belt issues by rev'ing faster too.
You're better off going with a good tensioner and really taking your time to get all of the pulleys aligned perfectly. A DynoJet doesn't have the same load as running on the street.
Mark
Mark
