Turbo Technology Inc Street Kit Role Call
#41
Hi , I am having a TT T-76 kit installed at Livernois and they are say about 450 rwhp with a stock motor and 52000 miles. I have the trans done right to. I'm new to the turbo systems . so how much hp can be made with the stock componets before major problems ? and at what boost . is there much turbo lag with a 3200 yank conv.
Thank you.
Thank you.
#42
Originally Posted by CANXLR8
Hi , I am having a TT T-76 kit installed at Livernois and they are say about 450 rwhp with a stock motor and 52000 miles. I have the trans done right to. I'm new to the turbo systems . so how much hp can be made with the stock componets before major problems ? and at what boost . is there much turbo lag with a 3200 yank conv.
Thank you.
Thank you.
it all a matter of time myself i would say anyting over 8psi you are pushing it. but everyone engine is differnt....
take it enjoy and save for a nice built bottom end with low cr!
#43
TECH Addict
iTrader: (11)
Originally Posted by SINISTER
it all a matter of time myself i would say anyting over 8psi you are pushing it. but everyone engine is differnt....
take it enjoy and save for a nice built bottom end with low cr!
take it enjoy and save for a nice built bottom end with low cr!
Also, the links in your sig don't work, do have any pics of your system installed?
Bill
#44
Originally Posted by Billiumss
Do you still want to meet up this summer in Pittsburgh? I'll be there the weekend of July 23rd. PM me
Also, the links in your sig don't work, do have any pics of your system installed?
Bill
Also, the links in your sig don't work, do have any pics of your system installed?
Bill
#46
Ive got a TTI Street kit
I bought the Phamspeed budget kit with a PT70 turbo, FMIC, BOV, etc. The Phamspeed kit for a street only car has issues with ground clearance and really wasn't thought out too well.
I bought the TTI street kit and I am using the PT70 I got with the Phamspeed kit, BOV and wastegate.
What HP limits to you recommend for a stock bottom end?
I bought the TTI street kit and I am using the PT70 I got with the Phamspeed kit, BOV and wastegate.
What HP limits to you recommend for a stock bottom end?
#47
TECH Enthusiast
iTrader: (5)
Join Date: Feb 2004
Location: Detroit area, MI
Posts: 595
Likes: 0
Received 0 Likes
on
0 Posts
With a good tune I think most people are ok around 450 - 475 but my motor blew up when it was tuned at about 430 on a mustang dyno by a reputable sponsor (a few months after the tune, not during the tuning). It all depends, if you are getting any detonation then you are screwed because the stock pistons are junk and many a ringland have been broken going for 500rwhp. Did you get the new upgraded hot parts or did you buy a used kit?? just curious. I am looking for input on the new under the engine X-over.