Add On Intercooler Setup for STS
Thread Starter
On The Tree
Joined: Nov 2004
Posts: 104
Likes: 0
From: San Antonio
Add On Intercooler Setup for STS Pro Turbo Built a intercooler set up for the STS LS1 car. It uses american made presure tested bar and plate cores. Rated up to 800 HP. And the system
features 4 ply silicone and all clamps. This is not some cheap ebay product. These are the same air to air cores that are used on our systems. All piping
comes silver powder coated.
I am seeing what kind of a demand there is for the product. I will follow with some pictures shortly.
If any one would like to get some info then just give me a call at the office.
Thanks, Dalton 1 210 657 2076
features 4 ply silicone and all clamps. This is not some cheap ebay product. These are the same air to air cores that are used on our systems. All piping
comes silver powder coated.
I am seeing what kind of a demand there is for the product. I will follow with some pictures shortly.
If any one would like to get some info then just give me a call at the office.
Thanks, Dalton 1 210 657 2076
Trending Topics
Originally Posted by JZ 97 SS 1500
Dan, the LS1 kit is complete and already on the market. The LT1 kit just put down 987rwhp/922rwtq on a 355 LT1 with a 76GTS using a smaller intercooler.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by JZ 97 SS 1500
Dan, the LS1 kit is complete and already on the market. The LT1 kit just put down 987rwhp/922rwtq on a 355 LT1 with a 76GTS using a smaller intercooler.
For some reason I couldn't find it your website earlier.
Originally Posted by JZ 97 SS 1500
Dan, the LS1 kit is complete and already on the market. The LT1 kit just put down 987rwhp/922rwtq on a 355 LT1 with a 76GTS using a smaller intercooler.
This is on an STS style or STS kit..???????
The 987rwhp was with 23-24psi, and that was done with the PTK system. The STS system to make that power would be asking a tad much...hehe. As for the price guys, this is a well built system, pressure tested and coated using the best components. They aren't using cheap ebay cores, pre-bent tubes, and krylon paint here...lol.
Jose
Jose
Mild steel tubing....
Pre-bent cut and welded together mild steel tubing from what I see on those pics...
Powder coating to protect rust prone mild steel tubing....in and out I assume or is it??
I take it thats the prototype kit, and all IC pipes are one piece mandrel bent pieces on production kits to back up your non pre-bent tube claim and that price?
~wow~
Pre-bent cut and welded together mild steel tubing from what I see on those pics...
Powder coating to protect rust prone mild steel tubing....in and out I assume or is it??
I take it thats the prototype kit, and all IC pipes are one piece mandrel bent pieces on production kits to back up your non pre-bent tube claim and that price?
~wow~
I think ill stick with Ebay cores for $250 or Griffins for $5-600 and all SS bends for about $150 and all my HTS fitting for about $2-250.... at the most $$$ i quoted its still $300 more in your pocket using a griffin....... Thats just my .02 though and everyones entitled to there own oppinion......
Kyle
Kyle
On The Tree
Joined: Feb 2004
Posts: 184
Likes: 0
From: Salt Lake City
Originally Posted by NA$TY-TA
I think ill stick with Ebay cores for $250 or Griffins for $5-600 and all SS bends for about $150 and all my HTS fitting for about $2-250.... at the most $$$ i quoted its still $300 more in your pocket using a griffin....... Thats just my .02 though and everyones entitled to there own oppinion......
Kyle
Kyle
It doesn't look like it cuts into the front bumper support which is good, whats involved in the install?
Originally Posted by Arkangel77
I am intrested BUT thats TOO rich for me? I can do the work Myself for 1/2 of that price?
Kyle