video from the track...
03-12-2005, 03:22 PM
#22
TECH Enthusiast
Join Date: Jun 2003
Location: So Cal
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tiago
http://www.force-fed-fabrications.com/videos/drags.wmv
first time at the track with the setup tuned as is.
mods: stock 99 engine with Diamond pistons and Eagle Rods. HPE assembled the bottom end. Stock ls1 intake and exaust manifolds, stock heads(untouched) and cam from 99. The power maker is my custom turbo kit at 10 psi, 93 octane, 615 rwhp. I have fuel system upgrades of course. Stock rear so soft lauches.
best run
2.05 60ft
7.75 @ 100 mph 1/8
11.6 at 130 mph 1/4
first time at the track with the setup tuned as is.
mods: stock 99 engine with Diamond pistons and Eagle Rods. HPE assembled the bottom end. Stock ls1 intake and exaust manifolds, stock heads(untouched) and cam from 99. The power maker is my custom turbo kit at 10 psi, 93 octane, 615 rwhp. I have fuel system upgrades of course. Stock rear so soft lauches.
best run
2.05 60ft
7.75 @ 100 mph 1/8
11.6 at 130 mph 1/4
Is this kit stainless or mild steel? where does the downpipe run? Thanks.
03-12-2005, 04:25 PM
#23
Staging Lane
Join Date: Mar 2005
Location: San Antonio Texas
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tiago
http://www.force-fed-fabrications.com/videos/drags.wmv
first time at the track with the setup tuned as is.
mods: stock 99 engine with Diamond pistons and Eagle Rods. HPE assembled the bottom end. Stock ls1 intake and exaust manifolds, stock heads(untouched) and cam from 99. The power maker is my custom turbo kit at 10 psi, 93 octane, 615 rwhp. I have fuel system upgrades of course. Stock rear so soft lauches.
best run
2.05 60ft
7.75 @ 100 mph 1/8
11.6 at 130 mph 1/4
first time at the track with the setup tuned as is.
mods: stock 99 engine with Diamond pistons and Eagle Rods. HPE assembled the bottom end. Stock ls1 intake and exaust manifolds, stock heads(untouched) and cam from 99. The power maker is my custom turbo kit at 10 psi, 93 octane, 615 rwhp. I have fuel system upgrades of course. Stock rear so soft lauches.
best run
2.05 60ft
7.75 @ 100 mph 1/8
11.6 at 130 mph 1/4
03-12-2005, 04:43 PM
#24
TECH Enthusiast
Join Date: Mar 2004
Posts: 697
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DragLS1
Where can I find pics of your setup? How did you use the stock exhaust manifolds with the turbo?
03-13-2005, 08:38 AM
#26
9 Second Club
Thread Starter
iTrader: (27)
Join Date: Apr 2003
Location: HOUSTON-TX
Posts: 3,685
Likes: 0
Received 0 Likes
on
0 Posts
hehe, for those that have seen the car, it is pretty damn quiet 
My kit is made of mild steel, just painted for rust protection. The Down pipe runs under the Kmember, there are lot of pics if you look through my site you will find.
My kit is made of mild steel, just painted for rust protection. The Down pipe runs under the Kmember, there are lot of pics if you look through my site you will find.
03-13-2005, 08:17 PM
#28
Very nice Tiago, great run and kick AZZ mph ! It's good to know there are people that aren't sitting back and letting everyone else have fun designing, manufacturing and testing turbo kits. 
03-15-2005, 09:14 PM
#32
12 Second Club
iTrader: (4)
Join Date: Feb 2004
Location: Katy, Tx.
Posts: 630
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2002 Trans Am
Good luck daddy!
Thats cool that your wife and child come watch you
Car looked awesome, took off like a friggin rocket once you got going
Thats cool that your wife and child come watch you
Car looked awesome, took off like a friggin rocket once you got going
. Tiago bult my Turbo and it was the first night for both of us at the track with them on. That run was 13.9 @ 106 for my little V6. Full street trim and on street tires....