dyno with new cam
Thread Starter
On The Tree
Joined: May 2003
Posts: 151
Likes: 0
From: Gastonia,NC
dyno with new cam Well the car has LT's, cam, and a P1sc at 7.5#. Before the cam it made 467rwhp and 447rwtq with 8#. The car is a M6 by the way. So I took it to Jeff Saturday and had it retuned for the cam and I was very surprised. It layed down 549rwhp and 492rwtq! 
The tune is pretty conservative with the A/F around 11.7 or so and 17* of timing. If someone will put the graph up I will email to them tommorrow mourning.
The tune is pretty conservative with the A/F around 11.7 or so and 17* of timing. If someone will put the graph up I will email to them tommorrow mourning. Thread Starter
On The Tree
Joined: May 2003
Posts: 151
Likes: 0
From: Gastonia,NC
Originally Posted by sb427f-car
Damn, sounds like you could run a few more * of advance too. Nice!
. Trending Topics
Thread Starter
On The Tree
Joined: May 2003
Posts: 151
Likes: 0
From: Gastonia,NC
Thanks kraZy for posting the sheet.
2000: Yeah I had lost about 1.5 lbs with the 6 rib pulleys that I was running after the cam. So I went to an 8 rib and different pulley combo to get it back.
2000: Yeah I had lost about 1.5 lbs with the 6 rib pulleys that I was running after the cam. So I went to an 8 rib and different pulley combo to get it back.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
On The Tree
Joined: May 2003
Posts: 151
Likes: 0
From: Gastonia,NC
Originally Posted by SSls1man
Awesome gains ! Can't wait till I can meet "the man" for a good tune in the next 2-3 weeks .
1BADChev: Yeah same here I'm working on that now, if it last through the summer it'll be my winter project. I'm going to stay stock cubes, I think I should be able to get to 650 fairly easy with heads and a little more boost, or maybe a little gas.