what turbo would be the best for getting to 700+ rwhp on a built forged 347 with 6.0L heads and a turbo cam. i was thinking a t76 would do the job but might start running out of air at the top end. would a t88 or gt42 be better suited?

this isn't for me (i wish), but you know who you are!!!!

 

Go as big as posible.

 

A T76gts would be best suited for that range

 

I am picking up a PTE-88 for my 347, 6.0 headed large cam turbo setup... track only though and very light weight....

 

thats what im doing

 

T106's for every one then!

 

 

bigger isin't always better........but, i don't know **** about turbos and all that. SMOKINHAWK what do you think about 347-348 c.i. w/ 6.0 heads, turbo cam for a daily driver. like STOLEIT said he's looking for top-end, would just a larger turbo meet his needs ???? race only or street/strip????

 

For 700rwhp a 76GTS is all you need.

 

GT42-76, quick spool and 1000 RWHP potential.

 

Same thing as 76GTS, just Garrett compressor cover.

 

 

What will be my approx spool rpm with the PTE-88 on my 347..????

 

think Jose has stated something like 4000-4500rpm

whats your setup redumss? phamspeed budjet? what a2w IC

 

A T88 will hit full boost around 4500rpms.

 

what about a t76 on stock cubes?

 

http://www.turbotechnologyinc.com/ls...ger_system.htm

 

It will hit around 4K.

 

6.0Lmanifoldsbackwardsmyownspecial kit..... The A2W is the last thing I have got to get. It is a full drag setup though.

 

Only one? I'd run two up front and another rear mounted.

With as much air as these motors push, a GTS would be fine on a 347. There's guys running smaller cube motors w/ the same turbo and running just fine.