BOSS APPROVED!
What is your raceweight FI guys
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Mine was 3940 Last time with me in it (235 then) w/ stero/sub box/spare tire/ ! back seats/ 1/2 tank of gas/ stock 10 bolt/iron block and procharger with FMIC. no cage
Now same motor/ Turbo kit/ no stereo / or A/C / Tubular K-member and A-Arms/ no back seat/12 bolt, and welds..... and me weighing 215 now. ha ha
oh and a 6 point rollbar now....
Im hoping for 3700 with me in it now.
we will see soon.
Kyle
Now same motor/ Turbo kit/ no stereo / or A/C / Tubular K-member and A-Arms/ no back seat/12 bolt, and welds..... and me weighing 215 now. ha ha
oh and a 6 point rollbar now....Im hoping for 3700 with me in it now.
we will see soon.
Kyle
SSU'S Vice Mod
Joined: Jul 2004
Posts: 2,391
Likes: 0
From: Hazard Co. Maryland
Originally Posted by Big Mike
3175 here.
Dang big mike, who put you're car on a diet. KP, where'd the cream filling go in your's as that's ideally what I'd like the car to weight with my heavy **** in it. 235+
Originally Posted by KAOS
kp how did you keep yours down
I have the seats/seatbelts (single 28lb corbeau forza seat/track), a/c, heat, airbags, parking brake out, most sound deadener cut/scraped out, light carpet, radio stuff gone, ABS stuff up front gone, PA k-member, bogarts/slicks/skinneys, aerospace front brakes, rear bumper support is lightened but still there.
but
I have a 98 which has the heavier gas tank, 6pt bolt in moly roll bar, 9" ford, 35lb rear drag sway bar, blower stuff is at least 80lbs more with the big IC and steel brackets/piping. TH400 with a blanket, HD 3" steel driveshaft, etc. I still have all stock wiring in the car, horn wipers, power steering, power brakes lights etc. All interior panels are in and the car looks decent on the inside, I could put some stock seats and a stock steering wheel in the car and you would never know it was gutted from looking at the interior
SSU'S Vice Mod
Joined: Jul 2004
Posts: 2,391
Likes: 0
From: Hazard Co. Maryland
Originally Posted by kp
I dont know, our scales here show almost 100lbs less then BG's scales last time I weighed the car, I know mine are pretty accurate though.
I have the seats/seatbelts (single 28lb corbeau forza seat/track), a/c, heat, airbags, parking brake out, most sound deadener cut/scraped out, light carpet, radio stuff gone, ABS stuff up front gone, PA k-member, bogarts/slicks/skinneys, aerospace front brakes, rear bumper support is lightened but still there.
but
I have a 98 which has the heavier gas tank, 6pt bolt in moly roll bar, 9" ford, 35lb rear drag sway bar, blower stuff is at least 80lbs more with the big IC and steel brackets/piping. TH400 with a blanket, HD 3" steel driveshaft, etc. I still have all stock wiring in the car, horn wipers, power steering, power brakes lights etc. All interior panels are in and the car looks decent on the inside, I could put some stock seats and a stock steering wheel in the car and you would never know it was gutted from looking at the interior
I have the seats/seatbelts (single 28lb corbeau forza seat/track), a/c, heat, airbags, parking brake out, most sound deadener cut/scraped out, light carpet, radio stuff gone, ABS stuff up front gone, PA k-member, bogarts/slicks/skinneys, aerospace front brakes, rear bumper support is lightened but still there.
but
I have a 98 which has the heavier gas tank, 6pt bolt in moly roll bar, 9" ford, 35lb rear drag sway bar, blower stuff is at least 80lbs more with the big IC and steel brackets/piping. TH400 with a blanket, HD 3" steel driveshaft, etc. I still have all stock wiring in the car, horn wipers, power steering, power brakes lights etc. All interior panels are in and the car looks decent on the inside, I could put some stock seats and a stock steering wheel in the car and you would never know it was gutted from looking at the interior
How is it for noise? I'd probably do most of that eventually as noise doesn't bother me to much. I wouldn't give up the radio (definately) or the AC (most likely), but I could later change my mind on the later.