Stenod Performance Single Turbo Project Update Pics Round II
#63
Originally Posted by The Blue OutLaw
Thanks, Rick. The car is coming along. I think Gary will turn it out before the end of the season. I guess that beats the mouthy MM people with NOTHING to show. Have you got something more than a Bulletin Board? Yeah, neither does sliver, the loser with a mouth... If he's willing, let's have a pop, but I'm sure he's too small for that.
You've NEVER addressed me before, Rick, so why now? We all know your "Open Loop Storm" garbage is worthless...
....
It's still an LS2-370 and a T-88, Joel's, Chance, BS3, 165, CM front suspension, Wolfe/FAB9 rear, and pure junk for the rest.
I'm sure I'll run a 12.50.
Bye!
You've NEVER addressed me before, Rick, so why now? We all know your "Open Loop Storm" garbage is worthless...
....
It's still an LS2-370 and a T-88, Joel's, Chance, BS3, 165, CM front suspension, Wolfe/FAB9 rear, and pure junk for the rest.
I'm sure I'll run a 12.50.
Bye!
I've always addressed you when you're being normal in person. It's your internet side that is wacked but that happens.
I was actually curious to see if you were making progress now that things got moved after a rough year. It sounded like you were talking like you were finally ready to get to the track after two years.
Looks like the new combo should finally get you a time slip that beats the daily driven "garbage" combo. Congrats on your progress.
Rick
#64
Thread Starter
TECH Senior Member
iTrader: (21)
Joined: Aug 2002
Posts: 10,333
Likes: 1
From: San Antonio, TX
Originally Posted by DERTY
Kyle caught wind that the last car he put one up front on went 9.20 off the trailer. He called and changed his order up.
Thanks Derty...... Thanks Kurt.... You guys and the rear jokes....
#65
Kyle, your motivating me to send my car off to the mainland now!!! Damn it. Of course, If I play it right, read through each post in this thread, even the panty pull down party, and I get sidetracked and remember the shipping would only add a couple grand to the price. Will wait til I make it back Jan/Feb...you'd better post some times by then.
#67
so your only going to go with a 4" Downpipe too.
i believe a certain CE was able to pass a 5"er throw the k-member like that.
i couldnt cause of my poly mounts. and of course the turbo has a 4" opening.
i believe a certain CE was able to pass a 5"er throw the k-member like that.
i couldnt cause of my poly mounts. and of course the turbo has a 4" opening.
#68
A 5" would fit, but is way overkill for that setup at the moment. Getting that extra little bit of space in there will certainly keep the downpipe from cooking the starter and a couple other parts down there. When you go to 5" things get really tight.
#69
Thread Starter
TECH Senior Member
iTrader: (21)
Joined: Aug 2002
Posts: 10,333
Likes: 1
From: San Antonio, TX
These guys at Stenod Performance kick so much *** its not even funny...... well ok it is..
Was checking my email this morning and what did i find....... MORE pics from Joe and Kevin..
They finished the Drivers side header. Here are the pics...
Thanks guys.
Kyle
Was checking my email this morning and what did i find....... MORE pics from Joe and Kevin..
They finished the Drivers side header. Here are the pics...
Thanks guys.
Kyle
#75
Thread Starter
TECH Senior Member
iTrader: (21)
Joined: Aug 2002
Posts: 10,333
Likes: 1
From: San Antonio, TX
Originally Posted by v8maro
Kyle,
You better give me a call when you come up here to pick that beast up! Lookin' good man, looks a LOT better than what APE (*******) ever could do.
-Steve
You better give me a call when you come up here to pick that beast up! Lookin' good man, looks a LOT better than what APE (*******) ever could do.
-Steve
Kyle
#76
Originally Posted by NA$TY-TA
These guys at Stenod Performance kick so much *** its not even funny...... well ok it is..
Was checking my email this morning and what did i find....... MORE pics from Joe and Kevin..
They finished the Drivers side header. Here are the pics...
Thanks guys.
Kyle
Was checking my email this morning and what did i find....... MORE pics from Joe and Kevin..
They finished the Drivers side header. Here are the pics...
Thanks guys.
Kyle