put me on the list for 1!and ill be glad to throw you some green for it. 
New Ic Mounted
New Ic Mounted 
all in all it looks pretty good i think. just have to route the pipe to the TB. waiting my kit for the rest of it. any suggestions for securing the bottom 2 tabs? also threw in a pic of my radiator cover i made. looks alright for a freebie. the supporting brackets are underneith, thats just a cover, no support. also what do you think if the filter placement if you can see it in that same pic
Trending Topics
Originally Posted by ddnspider
you asking me that?
I'm always interested in TA FMIC set-ups. I'd like to know what everybody's doing. I know it's not easy for us, Firebird/TA owners. I still worry about how I'm gonna get mine done.
Kaos, really nice pics, man.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo my father in law and i fabbed up a bracket for the bottom. solid as a rock, just as good as the bumper was. as for the bumper i just cut out that area where the front plate would go. not much air but its something. i dont know what else to do. copied my setup from frcefed98. his looks awesome. and the piping is copied off of hellraiser. those guys have real nice setups. the only way to do things in the world of ls1's is to just copy someone else's setup or at least get ideas from it. as for that rad shroud, well you would just have to see it. the brackts underneith are sort of ghetto but they hold very well. thats just a cover. no support there. once again thanks for the compliments. hope to get it done soon
Looks awesome, I like the radiator cover too. I didn't have to hack much of my bumper cover off on the bottom, just past the 3 tabs that were on the cover and then it wrapped up nicely to the bottom of the FMIC support. Great job and thanks for the props, glad I was able to help out
and why would you/we have to worry about curbs to the poster up top? I've never had an issue with curbs with my old FMIC set up(mounted to the bumper support) and this new set up which I fabbed up a custom FMIC support...the bottom of the FMIC comes nowhere close to hitting parking curbs....
Keep up the good work and post pics of the IC piping too,
J
and why would you/we have to worry about curbs to the poster up top? I've never had an issue with curbs with my old FMIC set up(mounted to the bumper support) and this new set up which I fabbed up a custom FMIC support...the bottom of the FMIC comes nowhere close to hitting parking curbs....
Keep up the good work and post pics of the IC piping too,
J
got a pic of how you made the front bumper hook up. i ended up using the bottom of my bumper for the bottom mounting plate. not sure but it might just go right back in place? didnt really think of it till now.
that is an old piece of tin i had lying around. maybe 1/16, i dunno. i just took the tin and used the edge of the table and bent it over with the help of a rubber malet. looks good, at least i think so
Right Jer??? 
No problem guys.... if ya need more pics let me know because if u search my pics will come up with the red X's of death because i moved sites... and the old ATI SC FMIC page isnt up yet.
Kyle
Kyle