Post pics of your Twin Turbo setup!
#24
TECH Senior Member
iTrader: (48)
Originally Posted by FastKat
What's with those aluminum plates on the engine?
#32
TECH Addict
iTrader: (36)
Join Date: Apr 2002
Location: Murphy, Tx
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by twoduners11
disassembled, man i gotta hand it to you. working out of a storage locker! i wish i had half your ambition. with a drive like that good things are sure to follow
good luck to ya
mark
good luck to ya
mark
that's crazy if he is, but he got alot done
#33
TECH Fanatic
iTrader: (5)
Join Date: Apr 2005
Location: Phoenix AZ
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
That illeagle here where i am. Lol. I would have done all my work at one if it was allowed. Alot of hot looin setups in here. Are those engine mount plates custom made per application or the something that i cna buy? I would like to get somethign like that as my motor mounts really need help. Thanks
John
John
#34
to: dissasembled- where did you get that intercooler? what did you have to do to get it to fit? did you have to move the radiator or anything?
to: the rest of the TT guys- where are you running your downpipes? would it be possible to mount the turbos in the front of the engine like Harland's old setup or LTLHOMER's setup, and then run the downpipe under the turbo, beside the block then back out to through the stock location? I know it probably wouldnt be possible in LTLHOMER's case because it seems like the engine mount is in the way, but what if i used the stock motor mounts?
t0: Everyone that has posted pics- i am not worthy i am not worthy
to: the rest of the TT guys- where are you running your downpipes? would it be possible to mount the turbos in the front of the engine like Harland's old setup or LTLHOMER's setup, and then run the downpipe under the turbo, beside the block then back out to through the stock location? I know it probably wouldnt be possible in LTLHOMER's case because it seems like the engine mount is in the way, but what if i used the stock motor mounts?
t0: Everyone that has posted pics- i am not worthy i am not worthy
#35
TECH Addict
iTrader: (4)
Join Date: Sep 2002
Location: Boise, ID
Posts: 2,542
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by smokinHawk
they take the place of motor mounts, they hold the motor straight so it doesnt torque, car that are making alot of power generally use them because the motor would move around alot more. also you dont loose any enegry from twisitng so it allows more to make it to the ground.
#37
TECH Addict
iTrader: (14)
Join Date: Nov 2002
Location: hurst tx
Posts: 2,560
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hagancue
Here are a couple of shot of my twin/twin setup.
if Fbody does it clear stock hood?
#38
Thanks to all of the replies. Yes i am working out of a storage unit. It's the only place i have since i am in the military. Luckily i convinced one of the local shops to let me borrow their lift all day so i can drop the car ontop of the motor and tranny when i get ready to install it. It looks like i may be going to LA so it's halting any work that can be done until i find out for sure if i am going or not. I just finished soldering together my megasquirt and need to start getting the electrical going.
The intercooler was bought from phamspeed/groundzeromotorsports but i don't know if they're being sold anymore. Here are the specs: core 25x10x3.5 vertical flow 2 2.5" inlets 1 4" outlet. I had to ditch the windshield washer resevoir, cut a half moon in the radiator support, and cut + reweld the hood release. I didn't do any of the fab work because i don't have any electricity or welding skills but the guy i took it to did a great job. The condensor and radiator are pushed back just a little bit for it all to fit but i still retain almost everything in the stock locations.
Here are some more pics: Top one is driver side turbo, next are passenger turbo and where i had to cut my frame to clearance it. I initially cut the frame with a dremel and a carbon fiber cut off wheel just so i could get the turbo to fit but my fabricator enlargened the hole for me to allow for some flex room.
Greg
The intercooler was bought from phamspeed/groundzeromotorsports but i don't know if they're being sold anymore. Here are the specs: core 25x10x3.5 vertical flow 2 2.5" inlets 1 4" outlet. I had to ditch the windshield washer resevoir, cut a half moon in the radiator support, and cut + reweld the hood release. I didn't do any of the fab work because i don't have any electricity or welding skills but the guy i took it to did a great job. The condensor and radiator are pushed back just a little bit for it all to fit but i still retain almost everything in the stock locations.
Here are some more pics: Top one is driver side turbo, next are passenger turbo and where i had to cut my frame to clearance it. I initially cut the frame with a dremel and a carbon fiber cut off wheel just so i could get the turbo to fit but my fabricator enlargened the hole for me to allow for some flex room.
Greg
#40
Originally Posted by Hagancue
Here are a couple of shot of my twin/twin setup.