klw1313

iTrader: (3)

if you had the motor built to handle high amounts of boost, but were only running around 13-15 PSI would it handle say a 150 shot at the same time?
anybody else running nitrous and forced induction? i know you would have to tune it to handle this.
what other precautions might i need to take?

Reject

iTrader: (24)

there are a bunch of ppl runnin nitrous to get the turbo to spool up faster, but if you wanting to run higher boost, ppl would recomend the alky/water injection.....correct me if i got the fuel wrong (forget sometimes!)

klw1313

iTrader: (3)

im saying run 13 PSI and a 150 shot. im not going to up my boost, well i cant unless i get a new turbo.

aggiez28

iTrader: (19)

it can work

brook

eviltwins

If you're maxing out the turbo at 13 psi you'll stand a good chance of damaging it if you hit it with a 150 HP hit of nitrous. That's a ton of extra exhaust flow, and will overspin the turbo easily.

My advice? Go get a properly sized turbo and ditch the bottle.

cablebandit

iTrader: (37)

i installed the hardware side of a dry kit today to get my car to get off the line....i'll hit it with about a 75rwhp shot for about 1 second and see what happens

klw1313

iTrader: (3)

let me know how that works

cablebandit

iTrader: (37)

first opportunity will be Sept 25th and of course i'll post the results