STS Turbo on Camaro SS being installed at Exotic Performance Plus
#21
TECH Addict
Cool little wastegate tailpipe Bob.
I hope the customer likes loud, with the dumped exhaust it's gonna drone like a *****! I have gone thru a few iterations of exhaust on mine, what you have there is definetly the loudest. It's actually quieter with no tail pipe at all, but then you can hear the whistle from 2 blocks away
Alot of folks like it that way though, hopefully this guy is one of them.
Get your earplugs out for WOT tuning, it's gonna get loud in there with that and the open wastegate.
Can't wait to hear how it does. Good luck!
I hope the customer likes loud, with the dumped exhaust it's gonna drone like a *****! I have gone thru a few iterations of exhaust on mine, what you have there is definetly the loudest. It's actually quieter with no tail pipe at all, but then you can hear the whistle from 2 blocks away
Alot of folks like it that way though, hopefully this guy is one of them.
Get your earplugs out for WOT tuning, it's gonna get loud in there with that and the open wastegate.
Can't wait to hear how it does. Good luck!
#23
The DR. Evil transmission is getting pulled Monday and will get rebuilt by Rodney at RPM Transmissions. Hopefully we'll have it back up and running by the end of next week. This car needs to get some miles on the fresh engine so we can crank up the boost and get it to Norwalk on Oct 22nd. Bob
#28
Bob, as you are an inquisitive guy, you might look at adding some thermal wrap. I started a thread here about this with the STS. Although my LS2GTO is building boost at low rpms [2200-2500rpm] I want to see quicker response time, and the more I think about it, I STRONGLY believe that a bit of heat wrap all the way to the turbo should SIGNIFICANTLY improve the spool of these cars. If the heat loss through the wall of the exhaust pipe can be minimized, the rear turbo becomes even less of a compromise.
You could be in a position to run this car on your dyno AND the street, add the wrap [if the owner is agreeable] and reassess, monitoring spool as well as power. This might prove to be invaluable data.
Think about it!
You could be in a position to run this car on your dyno AND the street, add the wrap [if the owner is agreeable] and reassess, monitoring spool as well as power. This might prove to be invaluable data.
Think about it!
#29
Originally Posted by MTBDOC
Bob, as you are an inquisitive guy, you might look at adding some thermal wrap. I started a thread here about this with the STS. Although my LS2GTO is building boost at low rpms [2200-2500rpm] I want to see quicker response time, and the more I think about it, I STRONGLY believe that a bit of heat wrap all the way to the turbo should SIGNIFICANTLY improve the spool of these cars. If the heat loss through the wall of the exhaust pipe can be minimized, the rear turbo becomes even less of a compromise.
You could be in a position to run this car on your dyno AND the street, add the wrap [if the owner is agreeable] and reassess, monitoring spool as well as power. This might prove to be invaluable data.
Think about it!
You could be in a position to run this car on your dyno AND the street, add the wrap [if the owner is agreeable] and reassess, monitoring spool as well as power. This might prove to be invaluable data.
Think about it!
#31
Originally Posted by Blackbird
That would be awesome Bob! If you do this you will officially be "the man"
Here's to hoping you will do it
Here's to hoping you will do it
#35
The tranny is back in the car. I drove it home last night, and I will continue to drive it as the customer is out in California right now and won't be back until right before we take the car to Norwalk, and he wants us to get miles on his new engine. Hopefully I can rack up some quick miles to break in the engine so we can up the boost. The tranny now is working great. Bob
#36
STS problems...
------------------------------------------------------------------------------- We dynoed at 448 HP @ 6# good... 558 HP @ 11.5 # GOOD... Problem is we need more boost, and when we street drove the car in the 11# setting it sets of the oil warning alarm but not in the 6#. Brent tried to call STS five times yesterday and left multiple messages and no reply...so I was hoping you guys might help
I'm resarching some different wastegate springs and Im confident I can get the boost up.
It was 76* 56.488% hum. 29.166" hg, today.
When we started our first pulls at 11# we had been doing part throttle tuning for a few hours so she was all warm and happy, IAT started @ 82 @3000 BY 3300 It dropped 1* and then climbed to 93* by 6400 (built full boost instentaneously) not bad !!! Bob
------------------------------------------------------------------------------- We dynoed at 448 HP @ 6# good... 558 HP @ 11.5 # GOOD... Problem is we need more boost, and when we street drove the car in the 11# setting it sets of the oil warning alarm but not in the 6#. Brent tried to call STS five times yesterday and left multiple messages and no reply...so I was hoping you guys might help
I'm resarching some different wastegate springs and Im confident I can get the boost up.
It was 76* 56.488% hum. 29.166" hg, today.
When we started our first pulls at 11# we had been doing part throttle tuning for a few hours so she was all warm and happy, IAT started @ 82 @3000 BY 3300 It dropped 1* and then climbed to 93* by 6400 (built full boost instentaneously) not bad !!! Bob
#39
Exotic, I absolutely love those pics. Gives me some ideas about what I could do myself to get a little clearance. ... that is after my car stops bucking like a pissed off bull.