harlans 2step?
I will be wanting one of these.
I've tweaked the circuit board layout to near the point i'm happy with it. That will take 2 weeks once i sumbit it to my board house.
Order is out for quote on the wiring harnesses, and the component suppliers are picked.
Connector order is ready to fax in.
Need to get a quote back on the boxes.
Once i get all the numbers back, i'll have final pricing.
I'm pleased w/ the design and operation
Don't worry folks, you'll know about it when it's ready
<img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" />
The Best V8 Stories One Small Block at Time
Similar in operation to an MSD soft-touch.
Good for staging, as you can hold the RPM but be at WOT while you do it.
Helps the auto trans guys get extra converter flash.
My main motivation for putting it together was launching a turbo car w/ an M6. I can now build boost sitting at the line w/ the clutch disengaged <img src="gr_grin.gif" border="0">
<strong>My main motivation for putting it together was launching a turbo car w/ an M6. </strong><hr></blockquote>
And your secondary motivation for releasing it will be to not have to hear me bitch anymore. <img src="gr_grin.gif" border="0"> Hurry up, man, I'm dying over here! <img src="gr_images/icons/wink.gif" border="0">
- Matt
<strong>It's a secondary, adjustable rev-limiter.
Similar in operation to an MSD soft-touch.
Good for staging, as you can hold the RPM but be at WOT while you do it.
Helps the auto trans guys get extra converter flash.
My main motivation for putting it together was launching a turbo car w/ an M6. I can now build boost sitting at the line w/ the clutch disengaged <img src="gr_grin.gif" border="0"> </strong><hr></blockquote>
Are you saying it would work well with my M6? If so you may have another customer.
<strong>I called the MSD tech line and they said that the MSD DIS-4 ignition system dose not work with the LS1.</strong><hr></blockquote>
What does the DIS-4 have to do with it??
Need a heads up from those interested in here:
https://ls1tech.com/ubb/cgi-bin/ulti...c&f=5&t=000834
Thanks,
Mike






