anyone run a low compresson motor NA for while
Thread Starter
Joined: Nov 2001
Posts: 10,018
Likes: 51
From: Virginia
Re: anyone run a low compresson motor NA for while ive been running my lc motor for about 5k miles so far waiting on the ls1motorsports kit to finish..
with all the heavy internal parts and the 8.75:1 compression i dynoed 301 horse/320 through offroad headers and a random cat back. also have 85mm maf and ls6 intake/ported tb. and a STOCK lid
guys with stock motor/compression on the same dyno and similar mods run about 360 to the wheels
the motor is an ARE 346 with stage one heads a very mild turbo cam, and custom pistons/billet rods etc.
with all the heavy internal parts and the 8.75:1 compression i dynoed 301 horse/320 through offroad headers and a random cat back. also have 85mm maf and ls6 intake/ported tb. and a STOCK lid
guys with stock motor/compression on the same dyno and similar mods run about 360 to the wheels
the motor is an ARE 346 with stage one heads a very mild turbo cam, and custom pistons/billet rods etc.
TECH Regular
Joined: Apr 2002
Posts: 462
Likes: 0
From: ...
Re: anyone run a low compresson motor NA for while Mine is going to be 408ci and I'm going to rev it up to 7000 rpm, and I'm also getting custom port and polished heads. I'm guessing maybe 400rwhp and 8.8:1 cr. I want 408rwhp, to get 1RWhp per CID. Does this sound at all possible?
<small>[ September 21, 2002, 03:26 PM: Message edited by: AlienDroid ]</small>
<small>[ September 21, 2002, 03:26 PM: Message edited by: AlienDroid ]</small>
Re: anyone run a low compresson motor NA for while I was just going to post this question...haha. I always wondered how much power a low compression motor could put out if you took the power adder off.
Re: anyone run a low compresson motor NA for while reving up your 4" stroke to 7k?
thats a bit much
6500 might be obtainable.
another guy who ran a 9:1 na motor for a while was "Reckless". he ended up sellling it to a FI guy though.
thats a bit much
6500 might be obtainable.
another guy who ran a 9:1 na motor for a while was "Reckless". he ended up sellling it to a FI guy though.
TECH Fanatic
Joined: Nov 2001
Posts: 1,986
Likes: 1
From: Centrifugal City
Re: anyone run a low compresson motor NA for while 9.6 and no noticeable power loss here. Maybe even less detonation in the FLA heat. On paper it's a 2% loss here. I did advance my timing a bit too.
