My Stenod Performance Build Take Another Step Foward
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
My Stenod Performance Build Take Another Step Foward Got the news yesterday that my new iron Block 370 was finished.
Iron block
Diamond 4.030" Pistons. Piston Tops and skirts Coated.
Pro Select rings
Eagle H-Beam Rods ARP L-19 Rod Bolts
Stock Crank
ARP main studs
ARP Head studs
6.0L 317 casting heads.2.02/1.57 valves. Reworked AGAIN....
Melling Oil pump
Rollmaster timing chain
New Comp XER 224/222 .581/.581 114+2
Comp R Lifters
All new sensors
all new gaskets
all new bearings.
I would like to thank Chuck @ Best machine for this new build that AP Engineering and there crew destroyed...
Now My Turbo build can go on....... this was the hold-up....
Here are some pic's of my new motor.
Ill be adding more Pic's next week when i Fly to Detroit.
Thanks
Kyle
Iron block
Diamond 4.030" Pistons. Piston Tops and skirts Coated.
Pro Select rings
Eagle H-Beam Rods ARP L-19 Rod Bolts
Stock Crank
ARP main studs
ARP Head studs
6.0L 317 casting heads.2.02/1.57 valves. Reworked AGAIN....
Melling Oil pump
Rollmaster timing chain
New Comp XER 224/222 .581/.581 114+2
Comp R Lifters
All new sensors
all new gaskets
all new bearings.
I would like to thank Chuck @ Best machine for this new build that AP Engineering and there crew destroyed...
Now My Turbo build can go on....... this was the hold-up....
Here are some pic's of my new motor.
Ill be adding more Pic's next week when i Fly to Detroit.
Thanks
Kyle
Trending Topics
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
With the parts from the 1st build and this one i have about $8K in the motor now.... some of that doesnt count in the amount the motor is worth since it was from AP Engineering....
The total bill now is alot..... i couldnt of done it all by myself. My Bro Rob helped me out.... if not i would of never finished this build.
Thank you bro.
Kyle
The total bill now is alot..... i couldnt of done it all by myself. My Bro Rob helped me out.... if not i would of never finished this build.
Thank you bro.
Kyle
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
How did I know I'd see those pics on here. LOL... no worries bro, we're almost there!!! A few more weeks and I'll be down to help break it in too! w00t!
Chuck's reputation preceeds him and I know that is one PERFECTLY BUILT motor! A big thanks goes out to him and the crew at Best Machine for helping us get this thing back where it should be!
Chuck's reputation preceeds him and I know that is one PERFECTLY BUILT motor! A big thanks goes out to him and the crew at Best Machine for helping us get this thing back where it should be!
Originally Posted by SUPER DAVES Z
Your talkin' about 2000 Tran Zam, correct? Close to 2002 Trans am.
But ya dude, your setup looks pretty sick!
I was thinking about getting powder coated valve covers, but my car isnt really gonna be a show car, just something to drive around and enjoy.
Your setup should be pretty close to being done now huh?
If your ever out in my neck of the woods hit me up and we can go reak some havoc.
Your running a power glide right? or was it a 4l80e?
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Originally Posted by Toonz
How did I know I'd see those pics on here. LOL... no worries bro, we're almost there!!! A few more weeks and I'll be down to help break it in too! w00t!
Chuck's reputation preceeds him and I know that is one PERFECTLY BUILT motor! A big thanks goes out to him and the crew at Best Machine for helping us get this thing back where it should be!
Chuck's reputation preceeds him and I know that is one PERFECTLY BUILT motor! A big thanks goes out to him and the crew at Best Machine for helping us get this thing back where it should be!
Now its almost 1am there... GO TP SLEEP ha ha LOL
Ill call ya tomorrow.
Kyle
Dammit why isn't it in the car yet!!! Those slackers, get the whip cracking on em, no sleep until its ready
Looks good Kyle! Nice to be gettin closer and closer now.
We just finished picking up a 396 stroker just now too
J
Looks good Kyle! Nice to be gettin closer and closer now.
We just finished picking up a 396 stroker just now too
J
Originally Posted by 2002 Trans Am
maybe your confusing me with someone else....though I wish I had the *****/$$$ to do a kick *** setup like Nasty's yes sorry thought you were da-uder-guy 
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Originally Posted by 2000 Tran Zam
haha, close enough.
But ya dude, your setup looks pretty sick!
I was thinking about getting powder coated valve covers, but my car isnt really gonna be a show car, just something to drive around and enjoy.
Your setup should be pretty close to being done now huh?
If your ever out in my neck of the woods hit me up and we can go reak some havoc.
Your running a power glide right? or was it a 4l80e?
But ya dude, your setup looks pretty sick!
I was thinking about getting powder coated valve covers, but my car isnt really gonna be a show car, just something to drive around and enjoy.
Your setup should be pretty close to being done now huh?
If your ever out in my neck of the woods hit me up and we can go reak some havoc.
Your running a power glide right? or was it a 4l80e?
Getting close to being done. i cant wait... should be pretty
Yes i am running a Rossler Powerglide.
Kyle
