Sts Question

Reply Subscribe

Thread Tools

Search this Thread

Jan 5, 2006 | 03:44 PM

JD_Z28

Thread Starter

TECH Fanatic

iTrader: (19)

Joined: Jul 2005

Posts: 1,166

Likes: 1

From: Arizona

Sts Question

I have everything hooked up on the kit but the exhaust pipe to the turbo pipe, I want to drive the vehicle to an exhaust shop, will it be ok to drive it this way. the turbo pipe is laying inside the exhaust pipe.

Jan 5, 2006 | 05:57 PM

trtturbo

TECH Fanatic

iTrader: (25)

Joined: Mar 2004

Posts: 1,810

Likes: 0

From: Newark, Tx.

it will probably blow it out. you need to clamp it.
Make sure when you get to the exhaust shop, you put the turbo as high as you can before welding.

Jan 5, 2006 | 06:18 PM

WideOpenThrottle

Staging Lane

Joined: Aug 2005

Posts: 53

Likes: 0

From: Crestview, FL

I agree that you will most likely blow it out. If you do clamp make sure you don't clamp to hard to where you bend the pipe to much or you will not be able to rotate it.

Jan 6, 2006 | 08:32 AM

Devil's Due

Staging Lane

Joined: Aug 2005

Posts: 99

Likes: 0

From: St. Louis

Clamp it together just don't go WOT on the way to the shop or you will be reinstalling it on the side of the road.

Jan 6, 2006 | 09:02 AM

98Ztwentyeight

Banned

iTrader: (2)

Joined: Jun 2005

Posts: 238

Likes: 0

From: OKC OK

mounting

I saw a pic where a guy used a header type flange on his!

I thought that was kinda cool!

incase yah ever had to take the gas tank down

to change your fuel pump and with this kit your gonna be

changing your fuel pump..

Last edited by 98Ztwentyeight; Jan 6, 2006 at 09:12 AM.

Jan 6, 2006 | 10:15 AM

Wolfee

TECH Regular

iTrader: (3)

Joined: Jan 2004

Posts: 413

Likes: 0

From: Decatur,IN

That might have been mine, it is all custom and while I was at it I just put a 3" header flange on both sides so it would come apart very easy if I ever needed to.
Wolfee

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last