1000 hp convertible
#46
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Pensacola
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
The heads are AFR's that have had a little work done. They flow 300, 236 @600. Could have got more out of the intake but no need when its being forced in there.
I used a satin black paint not sure on the brand I'll have to check, but it was done with a can so I could do touch ups easily.
As soon as I get it to the shop to do some tunning on the dyno I will snap some pics from underneath. Thanks again
Billy
I used a satin black paint not sure on the brand I'll have to check, but it was done with a can so I could do touch ups easily.
As soon as I get it to the shop to do some tunning on the dyno I will snap some pics from underneath. Thanks again
Billy
#48
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Pensacola
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Ha preciate it. I just got another laptop this weekend, so now I can start on the tunning again. I had a big setback cause my laptop took a dump. But I should be able to make some headway now. I spent all weekend at my buddy's shop helping them set up the new dyno. And dont worry about the pics I tend to go a little overboard with the camera!!
#59
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Pensacola
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
LOL dernit man!! Yea I have been slackin here lately!! I got another laptop and played with it a little bit, but havnt got all the bugs figured out yet. This gen 6 is a pain in the ars! I need to get up a little more motivation and finish the brakes then I can hopefully get some good video of it! I'll keep in touch ive just been so busy with other stuff right now, but thats all about to go to the back again!!