1000 hp convertible
#1
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Pensacola
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
1000 hp convertible
Alright guys I have held out long enough. The car will be on the road very soon. I have to fix a leak in the brake line and bleed the brakes then do some more tunning on the dfi and she should be ready to cruise around and break in. After about a week of driving I will be hittin the dyno and get a good tune on it. Before anyone starts bashing on the 1000 hp, it may not do it with the turbo alone but if you can see there is a plate kit under that throttle body and it goes up to 300 hp.
Specs are 383, mowtown race block, venoila 30+ psi boost custom pistons, AFR fully ported heads, 226,234, 116 cam, all forged of course, t-76, custom made (by me ) headers and rest of kit. t-56 tranny with a moser 12 bolt (spool), etc.....
Pics suck and car is very dirty.
what ya think?
Specs are 383, mowtown race block, venoila 30+ psi boost custom pistons, AFR fully ported heads, 226,234, 116 cam, all forged of course, t-76, custom made (by me ) headers and rest of kit. t-56 tranny with a moser 12 bolt (spool), etc.....
Pics suck and car is very dirty.
what ya think?
Last edited by bc56f100; 02-21-2006 at 03:17 PM.
#4
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Pensacola
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TJ
id have washed the motor, mang.
that this is flat out nasty.
cant believe you posted pics of a filty motor!
that this is flat out nasty.
cant believe you posted pics of a filty motor!
Preciate it F1RBlownbird. We should have our dyno here in town by the end of this week so hopefully it wont be to much longer!!
#6
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Pensacola
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by EvoByDarwin
Might wanna get those tires goin in the right direction .
Sweet setup man, very clean.
Sweet setup man, very clean.
Ha I knew someone would see that! Naw I just threw them one there to move the car around. They will be comming off to get polished up real nice before it comes out!!
Trending Topics
#11
TECH Junkie
iTrader: (10)
Originally Posted by bboyferal
Badass... and best of all, it's done in VERY GOOD TASTE. It seems you've thought of many details including some I probably didn't even notice... Very beautiful.
you cant see any of it, not even the injector wiring.
the pipes dont look too bad either.
dont make me do a blow thru billy, ill come after you.
#16
TECH Resident
iTrader: (4)
Join Date: Jul 2004
Location: USA
Posts: 972
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TJ
that is all stainless works piping, TIG welded.
no coating.
no coating.
Looks great bro!
#17
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Pensacola
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Wet 1
They did a nice job on the piping. Did you bring the car to them? If not, how did they fab all the custom bends and fitment?
Looks great bro!
Looks great bro!
No I did all the work myself. I just ordered the bends I wanted and went to town. I got some flanges and 2 boxes of misc. bends to do the headers. This has to be the funest project i've done so far. Cant waight to do another one!!
And yes it will have 1000+ hp to the ground. I will make sure of that!
Preciate it everyone I've got a ton of work in this thing and cant waight to be driving it again.
#19
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Pensacola
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by N20LS1
Looks good, I like the ceramic coating can't wait to see your dyno#
Thanks N20LS1, but its all stainless pipe, and I just took a wire wheel to the intake. The headers have a nice golden/blue color to them now that it has fired up. And I'm right there with ya on the dyno#'s!
#20
TECH Resident
iTrader: (4)
Join Date: Jul 2004
Location: USA
Posts: 972
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bc56f100
No I did all the work myself. I just ordered the bends I wanted and went to town. I got some flanges and 2 boxes of misc. bends to do the headers. This has to be the funest project i've done so far. Cant waight to do another one!!
And yes it will have 1000+ hp to the ground. I will make sure of that!
Preciate it everyone I've got a ton of work in this thing and cant waight to be driving it again.
And yes it will have 1000+ hp to the ground. I will make sure of that!
Preciate it everyone I've got a ton of work in this thing and cant waight to be driving it again.
How long did it take you to fab everything? If you don't mind me asking, what did it cost you for the piping (PM me if you'd prefer not to post it)?
One observation, I don't see any slip joints in the pictures... did you use any?